an6830p447002fa

Subsequently making opening in trim panel of rear roof frame

Tipo an · tema 68.30 · versão 0100 · 2006-07-25

Válido para: MODEL 210.2 with CODE (290) Windowbag

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 3 Carroçaria › 68 Acabamento interno › 68.30 Revestimentos, frisos — Série 210 (modelos 2**)

EinPAS 37 Acabamento interno › 37.45 Revestimento › 37.45.3 Instalação/modificação posterior — Série 210 (modelos 2**)

AN68.30-P-4470-02FA

Subsequently making opening in trim panel of rear roof frame

Saw template for seat-belt guide bracket opening in roof frame's trim

WF58.50-P-6830-01FA

Workshop equipment

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1004-03A

Body saw (electric/pneumatic)

Subsequently making opening in trim panel of rear roof frame

P68.30-2265-01

1 Tape roof lining in area of intended opening.

2 Align template with the guide edge (arrow) of the roof frame's trim and fasten in place.

3 Bore hole (diameter 10 mm) within the sawing area at position shown.

4 Saw out opening using a body-panel saw in accordance with the template.

Note direction of sawing (arrows). Do not yet saw out the upper cutout, risk of cracks and fracture!

Work from the inside of the roof-frame's trim.

Subsequently making opening in trim panel of rear roof frame

P68.30-2251-01

5 Saw out cutout on guide edge.

6 Saw through the bar between the cutout and the guide edge.

7 Clean the sawed out edge.

Documentos referenciados