AD07.61-S-6001-10A | Camshaft Hall-effect sensor, testing electrical system of ignition system (ME-SFI) |
| Scope of test | Measuring instrument/ Test connection | Operation/Requirement | Specified value | Possible cause/Remedy | ||
1.0 | Camshaft Hall-effect sensor (B48) Signal Carry out test with multimeter only if oscilloscope not available |
95 (39E) 96 (40E) | A61 A61 |
96 (40E) 2 (2A) | Test with oscilloscope Engine: Idling Engine: Idling | Signal refer to 1.2 - 1.7 V Value fluctuates | B48 1.1 |
1.1 | Voltage supply Camshaft Hall-effect sensor (B48) |
1 | B48 |
3 | Ignition: ON Disconnect coupling from camshaft Hall-effect sensor (B48) and test coupling sockets 1 and 3 | 11 - 14 V | ME-SFI control module (A61) 1.2 |
1.2 | Cable -//- Cable - Cable + | A61 95 (39E) 96 (40E) 2 (2A) |
|
B48 1 2 3 A61 95 (39E) 96 (40E) 2 (2A) A61 95 (39E) 96 (40E) 2 (2A) | Ignition: OFF Connectors A and E on ME-SFI control module (A61) disconnected Connector B48 disconnected Ignition: OFF Connectors A and E on ME-SFI control module (A61) disconnected Connector B48 disconnected Connectors A and E on ME-SFI control module (A61) disconnected Connector B48 disconnected Ignition: ON |
< 5 Ω < 5 Ω < 5 Ω > 20 kΩ > 20 kΩ > 20 kΩ < 1 V < 1 V < 1 V | Test cable for –//– Test cable for - Test cable for + |