sm3235w0002a
Check screws/bolts from stabilizer link to vehicle frame bearing bracket
Typ sm · temat 32.35 · wersja 0100 · 2014-06-10
Dotyczy: MODEL 956 with FRONT AXLE 739.5
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.35 Stabilizator — Seria 956
EinPAS 17 Zespół przeniesienia napędu/ oś › 17.50 Oś przednia › 17.50.41 Wahacz poprzeczny/wahacz/stabilizator — Seria 956
EinPAS 17 Zespół przeniesienia napędu/ oś › 17.51 Oś tylna › 17.51.40 Wahacz poprzeczny/wahacz/stabilizator — Seria 956
EinPAS 17 Zespół przeniesienia napędu/ oś › 17.52 Dodatkowa oś › 17.52.40 Wahacz poprzeczny/wahacz/stabilizator — Seria 956
EinPAS 45 Dane/ informacje › 45.20 Informacje/ działania › 45.20.40 Akcje serwisowe — Seria 956
Dotyczy też silników/skrzyń biegów: 739 5**
SM32.35-W-0002A
| Check screws/bolts from stabilizer link to vehicle frame bearing bracket
| 3.6.14
|
MODEL
| 956 with FRONT AXLE 739.5
|
Operation no. of the operation texts or standard texts and flat rates
|
Category
| Op. no.
| Operation text
| Time
| Acc. no.
| Code
|
N
| 028688
| Check screws/bolts from stabilizer link to vehicle frame bearing bracket
| 0,2 h
| 32 920 90
| STABIL-NGE
|
N
| 028689
| Replace bolt for stabilizer link to bearing bracket on vehicle frame (after check)
| 0,2 h
| 32 920 90
| STABIL-NGE
|
N
| 028690
| Replace each further bolt for the stabilizer link to the bearing bracket on the vehicle frame (after check)
| 0,1 h
| 32 920 90
| STABIL-NGE
|
1
| Stabilizer link
|
| 3
| Bearing cap
|
| 5
| Vehicle frame
|
2
| Screw
|
| 4
| Bearing bracket
|
|
|
|
|
| Check
|
|
|
1
| Check tightening torque of bolts (2) for fastening of stabilizer link (1) on left and right bearing bracket
| All bolts (2) must be tightened with min. 250 Nm.
|
|
|
|
| If a tightening torque of 250 Nm is reached on all bolts (2) before the bolt (2) can be turned any further:
|
|
|
|
|
|
|
|
|
| Perform no further operations and end measure.
|
|
|
|
| If a tightening torque of 250 Nm is not reached before the bolt (2) can be turned further:
|
|
|
|
|
|
|
|
|
| Fit respective new bolt (2).
|
|
|
|
| With regard to return shipment or scrapping of removed parts, please observe the information in your warranty system.
|
|
|
|
| Bearing cap of stabilizer link to vehicle frame bearing bracket
| *BA32.35-N-1001-02H
|
Front axle stabilizer bar
|
Number
| Designation
|
|
| Model 956 with front axle 739.5
|
BA32.35-N-1001-02H
| Bearing cap of stabilizer link to vehicle frame bearing bracket
| Stage 1
| Nm
| 225
|
|
|
| Stage 2
| °
| 90
|
Part no.
| Designation
| Quantity
|
N910105 016006
| Bolt, M16x1.5x80
| n. B.
|
