SI83.70-P-0001B | Service Information on stationary heaters, auxiliary heaters, heater boosters | 18.12.01 |
MODEL 163, 168, 202, 203, 208, 210, 215, 220, 230, 463
with Thermo Top Z/C stationary heater / heater booster
Modification notes
Operation no. of operation texts or standard texts and flat rates
Column | Op. no. | Operation text | Time | Acc. no. | Code |
P | 547943 | Repair wiring harness for stationary heater/ fossile heater booster, one connector | 006 WU/0.5 h | --- | --- |
P | 547943 | Repair wiring harness for stationary heater / fossile heater booster, both connectors | 008 work unit/0.7 h | --- | --- |
P | 541011 | Conduct quick test | 004 work units/0.3 h | --- | --- |
Repair wiring harness for Thermo Top Z/C stationary heater / heater booster:
In order to avoid completely replacing the wiring harness because of damage to the electrical connectors of the stationary heater/fossile heater booster, a repair harness has been defined (connector with cable end).
A repair harness exists for the voltage supply (2-pin) and for the control (6-pin).
The wiring harness should be separated in the engine compartment.
Tie back any cables not needed.
Parts ordering note
Part no. | Designation | Quantity |
A 220 540 49 32 | 2-pin voltage supply connector | if necessary |
A 220 540 50 32 | 6-pin control connector | if necessary |