SI60.80-G-0001B | Service information on cab | 22.2.01 |
MODELS 405.100 /102 /120 /122 /200 /220 with BODY 405.820
without tilting device (Code F60)
Our aim with this service information is to inform you about important points, which should be observed when using a crane to tilt a cab on a vehicle not equipped with a cab tilting device (Code F60).
The required safety strut and safety rope have to be shop made.
G60.80-3273-09
1 Cab
2 Lifting lug (engine)
5 Lifting lug (cab)
6 Safety strut
3 Safety rope
4 Shackle
Tilt cab | |||
Danger! | Risk of injury to anyone getting jammed and trapped under the tilting cab. | No person must be within the tilting range of the cab when the cab is tilted. Always tilt cab all the way into the end position and secure with safety strut. | |
| Notes on tilting cab | ||
1 | Tilt front flap and lock in place | See Service Instructions | |
2 | Release cab (1) | See Service Instructions | |
Check for any loose objects in the cab (1). | |||
3 | Carefully lift cab (1) using a crane | Lift only far enough until the lifting lug (2) is accessible. | |
4 | Insert safety rope (3) with both shackles (4) into lifting lugs (2, 5) | ||
5 | Carefully lift cab (1) and insert safety strut (6) into fastening point (arrow) | Lift cab (1) far enough to allow the safety strut (6) to be put into place. Make sure that the safety rope (3) is not fully tensioned. | |
6 | Carefully lower the cab (1) | Until the safety strut (6) fits securely into place. | |
7 | Tilt back in reverse sequence | Ensure sufficient free movement of cables and hoses etc. |
Powiązane dokumenty
- ah6080n000301b Wskazówki dotyczące przechylania kabiny kierowcy
- as6080z000101a Niebezpieczeństwo obrażeń przez zakleszczenie i zmiażdżenie przy przechylaniu kabiny kierowcy
- wf5850g001001b
- wf5850g001002b