si6080g0001a

Service information on cab

Typ si · temat 60.80 · wersja 0100 · 2003-06-18

Dotyczy: MODELS 427, 437

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 60 Nadwozie kompletne › 60.80 Kabina kierowcy, łożyskowanie kabiny kierowcy — Seria 427 · Seria 437

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.20 Kabina kierowcy/ karoseria › 35.20.30 Kabina kierowcy — Seria 427 · Seria 437

EinPAS 45 Dane/ informacje › 45.20 Informacje/ działania › 45.20.20 Informacje serwisowe — Seria 427 · Seria 437

SI60.80-G-0001A

Service information on cab

20.12.99

MODELS 427, 437

Modification notes

20.12.99

Takes place of STIN 83.30G003 from 08.12.99

SI-file: 83/16

When the cab is tilted up it could collide with the A/C compressor, with the result that the service valves or the refrigerant lines could be damaged.

This may cause fault codes F47, F49 to be displayed.

Danger!

Risk of injury from hand being jammed and bruised when tilting cab

No person must be within the tilting range of the cab when the cab is tilted. Always tilt cab as far as the end position and secure with safety prop.

AS60.80-Z-0001-01A

Prior to tipping the cab back into position:

1

Release the clamping bracket on the A/C compressor.

2

Swivel the A/C compressor towards the engine.

3

Tip cab back up.

Check that exposed parts, electric lines, speedometer shaft and hoses have unobstructed movement.

Powiązane dokumenty