SI60.10-P-0002B | Service information regarding straightening rig set | 17.2.00 |
MODEL 163.113 /136 /154 /172 /174
Modification notes
As of vehicle identification end no. A047569, Celette fixture set 7163.308 must be used to supplement dedicated fixture set 7163.300 when mounting frame or frame and car body onto straightening bench. This is due to a design change in the forward section of the frame.
Complementary fixture set 7163.308 consists of spacers that are installed onto the supports of MZ141 and MZ142. These spacers are identified as call-out number 35 in the setup plans provided with the fixture set.
Additionally, the dedicated fixture set 7163.300 has been superseded by the dedicated fixture set 7163.310, which includes complementary fixture set 7163.308.
P60.10-2028-09
Setup of dedicated fixture set 7163.308 for mounting frame and body as of vehicle identification end no. A047569.
P60.10-2029-09
Setup of dedicated fixture set 7163.308 for mounting frame as of vehicle identification end no. A047569.
P60.10-2033-01
Complementary dedicated fixture set 7163.307 is available for Model 163. This fixture set allows the correct location of the mounting points for the upper control arms (front and rear) and the axle carrier (front and rear) to be verified.
P60.10-2034-01
P60.10-2026-08
Setup of dedicated fixture set 7163.307 with front and rear axle carriers and upper control arms removed.
P60.10-2027-08
Setup of dedicated fixture set 7163.307 with front and rear axle carriers installed.
Workshop equipment
WE58.40-Z-1025-01A | Celette straightening bracket set 7163.307 (model 163), as supplement to 7163.300/ 310 |
WE58.40-Z-1026-01A | Celette straightening bracket set 7163.308 (model 163), as supplement to 7163.300 |
WE58.40-Z-1028-01A | Celette straightening bracket set 7163.310 (model 163), only with new ordering contains 7163.300 and 7163.308 |