As of the following chassis numbers, modified rear axle center assemblies were installed during production. The old rear axle center assemblies with ring gear diameter of 210 mm were replaced by new ones with ring gear diameter of 215 mm.
VIN: installed center assembly:
up to 199.376 1M 000484210 mm
from 199.376 ## ###485 215 mm
up to ## ###500
from 199.376 ## ###501 210 mm
up to ## ###517
as of 199.376 ## ###518 215 mm
If the rear axle center assembly is replaced in older vehicles due to a complaint, the new 215 mm center assembly must always be installed.
A corresponding WIS document with parts scope is being prepared.
If you have any questions, please contact the SLR Helpdesk.
Telephone: +44 1483 262626
E-mail: [email protected]