ra150a1245032x
5032 - A. Removing and installing alternator
Electrical system
Engines 102, 103, 104, 111, 601, 602, 603, 605, 606
Typ ra · temat 15.40 · wersja 9780 · 1997-07-27
Dotyczy:
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 1 Silnik › 15 Instalacja elektryczna silnika › 15.40 Alternator — Seria 601 (modele 912) · Seria 602 (modele 912, 962)
Dotyczy też silników/skrzyń biegów: 102 91*, 102 92*, 102 93*, 102 961, 102 962, 102 963, 102 982, 102 983, 102 985, 102 990, 102 991, 102 992, 103 940, 103 943, 103 980, 103 983, 103 985, 603 912, 603 913, 603 960, 603 962, 603 963, 605 911, 606 910
15-5032 Removing and installing alternator
Preceding work:
Poly V-belt removed (13-342)
Engine compartment panel removed (61-0105), engines 104, 111, 119.974/975
Front noise encapsulation removed (94-5310)
| Operation no. of operation texts and work units
or standard texts and flat rates:
|
A. Engines 102, 103, 104, 111, 601, 602, 603, 605, 606
Battery ground cable
| disconnect, connect.
|
Air intake cover (4)
| remove, if required, reinstall.
|
Electrical connection or connections (1) on
alternator (G2)
|
disconnect, reconnect.
|
Hex. nut (2)
| screw off, screw on (if present).
|
Hex. head bolts (3)
| screw out, screw in.
|
Engines 102, 103
|
|
Alternator (G2)
| remove upward, install from above.
|
Engine 104, 111, 601, 602, 603, 605, 606
|
|
Alternator (G2)
| remove downward, install from below.
|
Powiązane dokumenty
