PE88.79-W-2000-60AA | Legend of wiring diagram of outside mirrors | Models 970, 972, 974, 975, 976 as of 1.3.99 up to 28.2.03 |
Code | Designation | Coordinate |
A7 | Base module | 8M |
E25 | Driver door entrance lamp | 12M |
E26 | Passenger door entrance lamp | 20M |
F12Si12 | Horn/mirror heater/mirror adjustment/diagnostic socket/air conditioning/ Fog lamp/rear fog lamp, circuit 15 (base module) | 8L |
J14 | Cable weld connector, to A7, S24, S25, S37, S43, X13-14/2, X22.1-12/3, X23.1-12/5 | 9I |
J31 | Cable weld connector, to E25, R4, S87, X22.1-12/10 | 13I |
J40 | Cable weld connector, to W2 | 10L 21L |
J41 | Cable weld connector, to J49/W2.1 | 20K |
J42 | Cable weld connector, to XB.31/J40/W2, W6 | 10I 21I |
J49 | Cable weld connector, to W2.1 | 20L |
J54 | Cable weld connector, to E26, R5, X23.1-12/11 | 18K |
M9 | Driver mirror adjustment motor | 15L |
M10 | Passenger mirror adjustment motor | 17L |
R4 | Driver mirror heater | 14L |
R5 | Passenger mirror heater | 16L |
S37 | Mirror adjustment switch | 14C |
S87 | Driver door lock switch (CF [KB]) | 12M |
W2 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 11M 21M |
W2.1 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 20M |
XB.31 | Cable weld point circuit 31, center of cab dash support (at hazard warning light switch/driver ashtray) | 10K 21K |
X22.1 | Driver door connector | 8G 9H 14E 16E 19E |
X23.1 | Passenger door connector | 7G 15E 17E 20E 20H |
(522) | with right-hand drive on pin 5 | 14D |
(523) | with right-hand drive on pin 2 | 16D |
(524) | with right-hand drive on pin 11 | 19D |
(525) | with right-hand drive on pin 8 | 21D |