PE83.40-P-2000-60E | Legend for wiring diagram of air conditioning (automatic) | MODEL 208.3 as of 1.6.97, | |
Arrangement and assignment of the wiring and plug connectors, engine compartment, right | |||
Arrangement and assignment of the wiring and plug connectors, cockpit | |||
Arrangement and assignment of cable and plug connections - interior left | |||
Arrangement and assignment of cable and plug connections - interior right | |||
Arrangement and assignment of ground points, engine compartment, left | |||
Arrangement and assignment of ground terminals, cockpit | |||
Arrangement and assignment of Z connector sleeves (cable connections in wiring harness) - right engine compartment | |||
Arrangement and assignment of Z connector sleeves (cable connections in wiring harness) - cockpit | |||
Arrangement and assignment of the wiring and plug connectors, engine compartment, left | |||
Abbreviations of signal and circuit designations for wiring diagrams |
Item | Designation | Coordinate |
A1 | Instrument cluster | 14L |
A9 | AC compressor | 23L |
A9x1 | AC compressor connector | 23I |
A32 | Heating systems recirculated air unit | 10L |
A32m1 | Blower motor | 10L |
A32n1 | Blower controller | 11L |
B10/1 | Heat exchanger temperature sensor | 39L |
B10/4 | In-car temperature sensor with aspirator blower (contained in E15) | 30L |
B10/4b1 | Temperature sensor | 31L |
B10/4m1 | Aspirator blower | 30L |
B10/4x1 | In-car temperature sensor connector | 29K |
B10/6 | Evaporator temperature sensor | 40L |
B10/6x1 | Evaporator temperature sensor connector | 40K |
B12 | Refrigerant pressure sensor | 25L |
B12/1 | Refrigerant temperature sensor | 27L |
F1 | Fuse and relay box | 9L |
F1f20 | Fuse 20 | 12K |
F1f25 | Fuse 25 | 8K |
F1f26 | Fuse 26 | 13K |
F1f38 | Fuse 38 | 57G |
K40/2 | Driver-side fuse and relay module | 5A |
K40/4 | Front passenger-side fuse and relay mod ule | 43L |
M4 | Auxiliary fan | 61L |
M4m1 | Left additional fan | 59L |
M4m2 | Right additional fan | 62L |
M4/3 | Electric suction-type fan (engine / A/C) | 56L |
M4/3x1 | Electric suction fan connector, engine / A / C | 55I |
M13 | Coolant circulation pump | 21L |
N3/10 | ME-SFI [ME] control module | 46L |
N10/1 | Signal-acquisition and actuation module (SAM) driver side | 8A |
N22 | AAC pushbutton control module | 12A |
N52 | Roll-over bar (RB)/soft top operation control module | 36L |
N65/1 | Auxiliary fan control module | 62A |
N73 | DI control module | 5L |
N76 | Electric suction fan engine and air conditioning control module | 52A |
U13 | Valid for right-hand steering | 18I |
U150 | Valid for engine 112 | 50G |
U151 | Valid for engine 113 | 18I |
U310 | Valid for model 208.3 | 29D |
U311 | Valid for model 208.4 | 33D |
U528 | Valid for additional fan | 58A |
U529 | Valid for suction fan | 47A |
U539 | Valid for engine 111ME | 45F |
U589 | Valid for engine 111.921 (E18), 111.945 (E20) | 42F |
U695 | Valid for all gasoline models (except RHL with engine 113) | 18I |
W1 | Main ground (behind instrument cluster) | 5E |
W16/3 | Ground (output ground / component compartment / left) | 49E |
X4 | Circuit 30 terminal block, left footwell | 4G |
X11/4 | Data link connector | 22L |
X12/3 | Circuit 30/15 unfused terminal block, 3-pin | 57L |
X18/2 | Tail lamp wiring harness intermediate connector | 35G |
X26/23 | Engine compartment / cockpit connector | 1G |
X64/4 | Double additional fan connector, 2-pin | 58G |
Y11 | 15-valve block (multiplex) | 16L |
Y21 | Duo valve | 19L |
Y21y1 | Water valve, left side | 18L |
Y21y2 | Water valve, right side | 19L |
Z3/1 | AAC/TAC circuit 15 connector sleeve | 18E |
Z6/16 | AAC/TAC temperature sensor ground connector sleeve | 23E |
Z37/2 | CAN engine bus (low) connector sleeve | 2E |
Z37/3 | CAN engine bus (high) connector sleeve | 1E |