PE83.25-P-2000-60E | Legend for wiring diagram of automatic heater (HEAT) | MODEL 202, 208.3 as of 1.6.97, |
Item | Designation | Coordinate |
A1 | Instrument cluster | 7L |
A32 | Heating systems recirculation unit | 20L |
A32m1 | Blower motor | 19L |
A32n1 | Blower regulator | 20L |
B10/1 | Heater core temperature sensor | 26L 33L |
B10/4 | In-car temperature sensor | 23L 28L |
B10/4b1 | In-car temperature sensor | 24L 29L |
B10/4m1 | Aspirator blower | 23L 28L |
B10/4x1 | In-car temperature sensor connector | 22H |
F1 | Fuse and relay box | 9L 17F |
F1f20 | Fuse 20 | 18F |
F1f25 | Fuse 25 | 19F |
F1f26 | Fuse 26 | 8K |
F1f29 | Fuse 29 | 19F |
F1f30 | Fuse 30 | 8K |
K40/2 | Driver-side fuse and relay module | 2L 10G |
M13 | Coolant circulation pump | 13L |
N10/1 | Driver-side signal-acquisition and actuation module (SAM) | 5L |
N18 | HEAT pushbutton control module | 4A 12A 20A 28A |
N52 | Power soft top control module | 31L |
N73 | DI control module | 15L |
U23 | Valid for cabriolet | 27D |
U152 | Valid for model 202 | 8G 17D |
U153 | Valid for model 208 | 8G 17D |
U611 | Valid for coupé | 22D |
W1 | Main ground (behind instrument cluster) | 3H 21G 23E 28E |
X4 | Terminal block (circuit 30, left footwell) | 2H |
X18/2 | Taillamp harness intermediate connector | 30H |
Y13 | Fresh/recirculated air flap switchover valve | 17L |
Y21 | Duovalve | 11L |
Y21y1 | Left-side water valve | 11L |
Y21y2 | Right-side water valve | 11L |
Z81 | Circuit 58d connector sleeve (feed from instrument cluster (IC [KI]) | 6H |