PE80.50-W-2000-60BB | Legend for wiring diagram of anti-theft alarm system (ATA) | Models 970, 972, 974, 975, 976 as of 1.3.03 |
Code | Designation | Coordinate |
A7 | Base module | 30L 35L |
A23 | Central locking control unit | 9K |
A35 | Additional turn signal module 24 V trailer | 45L |
A36 | Additional turn signal module 12 V trailer | 46L |
A38 | Convenience locking system control module | 10J |
A43 | RFL control module | 8L |
A44 | ATA control module | 5A 18A 30A 43A |
B72 | Alarm siren | 40L |
B73 | Interior sensor, driver | 2L |
B74 | Interior sensor, passenger | 4L |
F5Si5 | Right turn signal lamp fuse (base module) | 34K |
F13Si13 | Left turn signal lamp fuse (base module) | 35K |
F15Si15 | Instrument lighting/switch lighting fuse, circuit 58 (base module) | 29K |
F40 | Fuse for PTO/lifting tailgate/ATA circuit 15 (fuse holder A1) | 32G |
J15 | Cable weld connector, to A7, A35, A36, A44, E19, K39, P4, X85-15/8 (with right-hand drive), X86-12/1 (with left-hand drive) | 34G |
J16 | Cable weld connector, to A7, A35, A36, A44, E18, K38, P4, X85-15/8 (with left-hand drive), X86-12/1 (with right-hand drive) | 36G |
J31 | Cable weld connector, to E25, R4, S87, X22.1-12/10 | 18J |
J34 | Cable weld connector, to A8, A23, A31, A34, A38, A40, A43, A44, A47, P4, X2.2-18/7, X13-14/4 | 6H |
J40 | Cable weld connector, to W2 | 27K |
J41 | Cable weld connector, to J49/W2.1 | 13J 37J |
J42 | Cable weld connector, to W6 | 19K 26K |
J45 | Cable weld connector, to A44, F40, S64, S65, X4.2-18/17 | 32E |
J49 | Cable weld connector, to W2.1 | 13K 37K |
J60 | Cable weld connector, to B72, X86-12/5 | 38G |
J68 | Cable weld connector, to A38, A44, X22.2-15/6 | 19D |
K8 | Terminal 15 relay | 33L |
P4 | Instrument cluster 2000 | 21L |
S20 | Left cab unlock switch | 20H |
S21 | Right cab unlock switch | 22H |
S47 | Door contact switch driver door | 26G |
S48 | Door contact switch passenger door | 12G |
S63 | Door unlock/lock switch | 25K |
S87 | Driver door lock switch | 18H |
S101 | Panic switch | 26G |
W2 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 27L |
W2.1 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 13L 37L |
W6 | Ground point, circuit 31, drive column bearing bracket | 19L 26L |
XB.15 | Cable weld point circuit 15, center of cab dash support (at front passenger cigar lighter) | 32J |
XB.30 | Cable weld point circuit 30, center of cab dash support (at 2nd radio slot and AC anti-icing switch) | 33G |
XB.31 | Cable weld point circuit 31, center of cab dash support (at hazard warning light switch/driver ashtray) | 27J |
XB.58 | Cable weld point, circuit 58, center of cab dash support | 31G |
X11 | Trailer socket, 15-pin | 43L |
X11.1 | Trailer socket, 15-pin (behind cab) | 44L |
X13 | Diagnostic socket | 6L |
X18.1 | Roof connector | 1F |
X22.1 | Driver door connector | 18K |
X22.2 | Driver door connector | 18F |
X47 | Cab-chassis connector | 42H |
X85 | Driver underbody connector | 20F |
X86 | Passenger underbody connector | 37H 39H |
X91 | ATA connector (body manufacturer) | 14G |
(273) | Voltage supply | 31L |
(350) | Optionally, depending on version | 9E |