PE80.45-W-2000-60AB | Electric circuit wiring diagram convenience locking system | Models 970, 972, 974, 975, 976 as of 1.3.03 |
Code | Designation | Coordinate |
A5 | GGVS control module | 11L |
A7 | Base module | 5L 26L 55L |
A38 | Convenience locking system control module | 9A 26A 42A 56A |
A43 | RFL control module | 31L |
A44 | ATA control module | 33K |
F9Si9 | Tachograph/seat belt warning buzzer/CL/convenience locking system/heated windshield fuse, circuit 15 (base module) | 5K |
F15Si15 | Instrument lighting/switch lighting fuse, circuit 58 (base module) | 26K 54K |
F37 | CL fuse/flame system, circuit 30 (fuse holder A3) | 4K 58K |
J31 | Cable weld connector, to E25, R4, S87, X22.1-12/10 | 35H |
J33 | Cable weld connector, to A23, A38, S45, X18.1-18/3, X22.1-12/8, X22.2-15/4, X23.1-12/10,X23.2-15/4 | 15E |
J34 | Cable weld connector, to A8, A23, A31, A34, A38, A40, A43, A44, A47, P4, X2.2-18/7, X13-14/4 | 8H |
J40 | Cable weld connector, to W2 | 28K 52K |
J41 | Cable weld connector, to J49/W2.1 | 29H 46H |
J42 | Cable weld connector, to W6 | 35K |
J46 | Cable weld connector, to A4, A23, A38, A43, F37, S31, S86, S107, X18.1-18/4, X26-18/1 | 4H 58H |
J47 | Cable weld connector, to A7, A23, A38, A43, P3, S67, X1.6-6/2, X7.6, X83-9/3 | 5H |
J49 | Cable weld connector, to W2.1 | 29K 46K |
J68 | Cable weld connector, to A38, A44, X22.2-15/6 | 36D |
M6 | Sliding roof motor/pop-up roof motor | 60L |
M7 | Driver door power window motor | 44L |
M8 | Passenger door power window motor | 40L |
M11 | Driver door CL motor CL/KSA | 22L |
M12 | Passenger door CL motor CL/KSA | 17L |
S34 | Passenger door power window switch | 52E |
S35 | Driver door power window switch | 47E |
S63 | Door unlock/lock switch | 24F |
S87 | Driver door lock switch | 35G |
S91 | Sliding roof lock switch | 56E |
V5 | Diode CL/KSA | 10F |
W2 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 29L 52L |
W2.1 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 29L 46L |
W6 | Ground point, circuit 31, drive column bearing bracket | 35L |
XB.31 | Cable weld point circuit 31 center of cab dash support (at hazard warning light switch/driver ashtray) | 28H 52H |
XB.58 | Cable weld point, circuit 58, center of cab dash support | 26H 55G |
X13 | Diagnostic socket | 8L |
X18.1 | Roof connector | 59G |
X22.1 | Driver door connector | 35J 42G |
X22.2 | Driver door connector | 19G 34G |
X23.1 | Passenger door connector | 38G |
X23.2 | Passenger door connector | 15G |
X47 | Cab-chassis connector | 10H |
(138) | With GGVS | 11E |
(273) | Voltage supply | 12L |
(350) | Optionally, depending on version | 30F |
(771) | Interior lights | 13J |