PE80.20-W-2000-60BB | Legend for wiring diagram of central locking (CL) | Models 970, 972, 974, 975, 976 as of 1.3.03 |
Code | Designation | Coordinate |
A5 | GGVS control module | 9L |
A7 | Base module | 4L 24L |
A23 | Central locking control unit | 9A 22A |
A43 | RFL control module | 30L |
A44 | ATA control module | 29K |
F9Si9 | Tachograph/seat belt warning buzzer/CL/convenience locking system/heated windshield fuse, circuit 15 (base module) | 4K |
F15Si15 | Instrument lighting/switch lighting fuse, circuit 58 (base module) | 22K |
F37 | CL fuse/flame system, circuit 30 (fuse holder A3) | 2K |
J33 | Cable weld connector, to A23, A38, S45, X18.1-18/3, X22.1-12/8, X22.2-15/4, X23.1-12/10,X23.2-15/4 | 13E |
J34 | Cable weld connector, to A8, A23, A31, A34, A38, A40, A43, A44, A47, P4, X2.2-18/7, X13-14/4 | 6H |
J40 | Cable weld connector, to W2 | 26K |
J41 | Cable weld connector, to J49/W2.1 | 3H |
J46 | Cable weld connector, to A4, A23, A38, A43, F37, S31, S86, S107, X18.1-18/4, X26-18/1 | 2H |
J47 | Cable weld connector, to A7, A23, A38, A43, P3, S67, X1.6-6/2, X7.6, X83-9/3 | 4H |
J49 | Cable weld connector, to W2.1 | 3K |
M11 | Driver door CL motor CL/KSA | 19L |
M12 | Passenger door CL motor CL/KSA | 15L |
S63 | Door unlock/lock switch | 22F |
V5 | Diode CL/KSA | 9F |
W2 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 26L |
W2.1 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 3L |
XB.31 | Cable weld point circuit 31 center of cab dash support (at hazard warning light switch/driver ashtray) | 26H |
XB.58 | Cable weld point, circuit 58, center of cab dash support | 23H |
X13 | Diagnostic socket | 6L |
X22.2 | Driver door connector | 17G |
X23.2 | Passenger door connector | 12G |
X47 | Cab-chassis connector | 8H |
(138) | With GGVS | 8E |
(273) | Voltage supply | 10L |
(350) | Optionally, depending on version | 29C |
(771) | Interior lights | 11K |