PE80.20-W-2000-60BA | Legend for wiring diagram of central locking (CL) | Models 970, 972, 974, 975, 976 as of 1.3.99 up to 28.2.03 |
Code | Designation | Coordinate |
A5 | GGVS control module | 9M |
A7 | Base module | 6M 23M |
A23 | KSA/ZV control unit | 2A 16A 28A |
A43 | RFL control module | 29M |
A44 | ATA control module | 28M |
F37 | CL fuse/flame system, circuit 30 (fuse holder A3) | 2L |
F9Si9 | Fuse for tachograph/seatbelt warning buzzer/CL/KSA/heated windshield, circuit 15 (base module) | 5L |
F15Si15 | Instrument lighting/switch lighting fuse, circuit 58 (base module) | 22L |
J33 | Cable weld connector, to A23, A38, S45, X18.1-18/3, X22.1-12/8, X22.2-15/4, X23.1-12/10, X23.2-15/4 | 11F |
J34 | Cable weld connector, to A8, A23, A31, A34, A38, A40, A43, A44, A47, P2, X13-14/4 | 7I |
J40 | Cable weld connector, to W2 | 25L |
J41 | Cable weld connector, to J49/W2.1 | 4I |
J46 | Cable weld connector, to A4, A23, A38, A43, F37, S31, S86, S107, X18.1-18/4, X26-18/1 | 3I |
J47 | Cable weld connector, to A7, A23, A38, A43, H20, K33, P1, S67 | 6I |
J49 | Cable weld connector, to W2.1 | 4L |
M11 | Driver door CL motor CL/KSA | 18M |
M12 | Passenger door CL motor CL/KSA | 13M |
S63 | Door unlock/lock switch | 21F |
V5 | Diode CL/KSA | 9G |
W2 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 26M |
W2.1 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 4M |
XB.31 | Cable weld point circuit 31 center of cab dash support (at hazard warning light switch/driver ashtray) | 25I |
XB.58 | Cable weld point, circuit 58, center of cab dash support | 23I |
X13 | Diagnostic socket | 7M |
X22.2 | Driver door connector | 16G 17G 18G 19G |
X23.2 | Passenger door connector | 11G 12G 13G 14G |
X47 | Cab-chassis connector | 9H |
(138) | With GGVS | 8F |
(350) | Optionally, depending on version | 28D |