PE77.20-W-2000-60AA | Legend for wiring diagram of sliding/pop-up roof (SR) | Models 970, 972, 974, 975, 976 as of 1.3.99 up to 28.2.03 |
Code | Designation | Coordinate |
A7 | Base module | 11M 35M |
A38 | Convenience locking system control module | 29M |
F15Si15 | Instrument lighting/switch lighting fuse, circuit 58 (base module) | 11L 35L |
F37 | Fuse for CL/KSA/flame system, circuit 30 (fuse holder A3) | 7L 31L |
J6 | Cable weld connector, to E12, E13, E27, E28, E29, E30, M6, X18.1-18/2 | 24K |
J40 | Cable weld connector, to W2 | 9K 21L 33K 45L |
J41 | Cable weld connector, to J49/W2.1 | 23K |
J42 | Cable weld connector, to XB.31/J40/W2, W6 | 21I 45I |
J46 | Cable weld connector, to A4, A23, A38, A43, F37, S31, S86, S107, X18.1-18/4, X26-18/1 | 7F 31F |
J49 | Cable weld connector, to W2.1 | 23L |
J56 | Cable weld connector, to E31, E32, S62, S92, S107, X26-18/7 | 21D 45D |
M6 | Sliding roof motor/pop-up roof motor | 27M |
M17 | Pop-up roof motor | 4M |
S31 | Sliding roof switch | 24E 35E |
S62 | Auxiliary heater switch | 19M 43M |
S86 | Pop-up roof switch | 2E 11E |
S92 | Sliding roof switch (rear wall) | 41E |
S107 | Pop-up roof switch (bunk) | 17E |
W2 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 9M 21M 33M 45M |
W2.1 | Ground point, circuit 31, cab front passenger footwell (at cab-chassis connectors) | 24M |
XB.31 | Cable weld point circuit 31 center of cab dash support (at hazard warning light switch/driver ashtray) | 9F 20K 32F 44K |
XB.58 | Cable weld point, circuit 58, center of cab dash support | 11H 35H |
X18.1 | Roof connector | 3I 4I 23I 25I 26I 27I 29I |
X26 | Power tailgate connector | 7D 15D 16D 17G 21G 31D 39D 40D 41G 45G |
(350) | Optionally, depending on version | 3H 5H 25G 27G |
(551) | Operation of dash support | 2E 24E |
(552) | Operation of bunk | 11E 35E |