PE77.20-W-2000-60A | Legend for wiring diagram of tilting/sliding roof (SR) | Model 970, 972, 974, 975, 976 up to 28.02.99 |
Item | Designation | Coordinate |
A7 | Base module | 12M 31M 35M |
A23 | ZV/KSA control unit | 29M |
F37 | ZV/KSA, flame starting system fuse, terminal 30 | 31H |
F40 | PTO 1/PTO 2/tilting roof fuse | 7I |
J6 | Cable weld connector, to E12, E13, E27, E28, E29, E30, M6, X18.1-18/2 | 24K |
J40 | Cable weld connector, to W2 | 9K 33K |
J41 | Cable weld connector, to J49/W2.1 | 23K |
J42 | Cable weld connector, to XB.31/J40/W2, W6 | 21K 45K |
J45 | Cable weld connector, to A44, F40, S64, S65, X7.4-2/2, X56-18/2 | 7G |
J46 | Cable weld connector, to A4, A23, A38, A43, F37, S31, S86, S107, X18.1-18/4, X26-18/1 | 31F |
J56 | Cable weld connector, to E31, E32, S62, S92, S107, X26-18/7 | 21D 45D |
K8 | Tml. 15 relay | 7M |
M6 | Tilting-sliding roof motor/tilting roof motor | 27M |
M17 | Tilting roof motor | 4M |
Si15 | Tml. 58 fuse | 11L 35L |
S31 | Sliding roof switch | 24E 35E |
S62 | Auxiliary heater switch | 19M 43M |
S86 | Tilting roof switch | 2E 11E |
S92 | Sliding roof switch (rear panel) | 41E |
S107 | Tilting roof switch (bunk) | 17E |
W2 | Ground point terminal 31 cab passenger footwell | 9M 33M |
W2.1 | Ground point terminal 31 cab passenger footwell | 23M |
W6 | Ground point tml. 31 (steering column mounting bracket) | 21M 45M |
XB.15 | Cable weld point tml. 15 center of cab waistrail (at passenger cigar lighter) | 7K |
XB.30 | Cable weld point tml. 30 center of cab waistrail (at 2nd radio compartment and air conditioning anti-icing switch) | 31I |
XB.31 | Cable weld point tml. 31 center of cab waistrail (at hazard warning light switch, driver ashtray) | 9F 33F |
XB.58 | Cable weld point tml. 58 center of cab waistrail | 11H 35H |
X18.1 | Roof plug connection | 3K 5K 23I 25I 26I 27I 29I |
X26 | Rear panel plug connection | 7D 15D 16D 17G 21G 31D 39D 40D 41G 45G |
(26) | 2nd rear axle transverse lock | 3H 5H 25G 27G |
(89) | Input circuit | 2E 24E |
(90) | Digital inputs | 11E 35E |