PE26.45-W-2000-60AC | Legend of wiring diagram of power take-off | Models 970, 972, 974, 975, 976 as of 1.3.03 |
Code | Designation | Coordinate |
A7 | Base module | 16L 31L |
A22 | PSM control unit | 21K 25L 37K 40L |
A31 | Warm air heater | 8L |
F15Si15 | Instrument illumination/switch illumination fuse, circuit 58 (base module) | 15K 31K |
F40 | PTO/tail lift/ATA fuse, circuit 15 (fuse holder A1) | 5E 33E |
J40 | Cable weld connector, to W2 | 5K 14K 30K |
J43 | Cable weld connector, to W3 | 9K 20K 35K |
J45 | Cable weld connector, to A44, F40, S64, S65, X4.2-18/17 | 5B 33B |
J69 | Cable weld connector, with PTO 1: to P4, S64, X2.2-18/4; with PTO 1+2: to A22, P4, S64, X2.2-18/4; with Allison: to A22, P4, X2.2-18/4 | 10E 26E |
J70 | Cable weld connector, to A22, P4, S65, X2.2-18/5 | 41E |
K8 | Circuit 15 relay | 5L 34L |
P4 | Instrument cluster 2000 | 12L 28L 43L |
S23 | PTO 1 switch | 10J 26J 41J |
S64 | PTO 1 switch | 9D 24D |
S65 | PTO 2 switch | 40D |
S79 | PTO 2 switch | 26J 41J |
W2 | Ground point circuit 31 cab front passenger footwell (at cab-chassis plug connections) | 14L 30L 45L |
W3 | Ground point, circuit 31, engine (in frame behind right front axle ABS solenoid valve) | 10L 20L 26L 36L 41L |
XB.15 | Cable weld point circuit 15 middle of cab waistrail (at front passenger cigar lighter) | 5H 33H |
XB.31 | Cable weld point circuit 31 center of cab waistrail (at hazard flasher switch /driver ashtray) | 14H 30H 45H |
XB.58 | Cable weld point, circuit 58, middle of cab waistrail | 15H 31H |
X2.2 | Cab-chassis connector | 10G 26G 41G |
X4.1 | Cab-chassis connector | 9G 20G 35G |
Y46 | PTO 1 solenoid valve | 9J 19J 35J |
Y47 | PTO 2 solenoid valve | 19J 35J |
(215) | Power take-off 1 | 2L |
(273) | Voltage supply | 4L 34L |
(350) | optionally depending on version | 21F |
(475) | PTO 1+2 | 19L |
(520) | only GGVS with PTO without PSM | 7E |
(635) | in the case of transmission lock for DNA (CODE NK5) | 19J 26J 35J 41J |