AZ88.00-P-0002MCC | Retrofit chrome package | 6.12.11 |
MODEL 451.3 /4 up to 19.3.12 except CODE (P02) car2go
P88.00-2361-07
1 Chrome front grille
3 Adhesive strips
2 Chrome mirror caps
P88.00-2362-04
4 Trim strip
5 Adhesive tape
Modification notes
| Remove | ||
1 | Remove upper front grille and disassemble | ||
| Install | ||
2 | Assemble chrome front grille (1) with carrier of upper front grille and install. | Do not reinstall upper front grille. | |
3 | Clean contact surfaces on chrome mirror caps (2). | ||
4 | Remove protective foils from adhesive strips (3), position chrome mirror caps (2) and press on. | ||
5 | Clean contact surface on trim strip (4). | ||
6 | Position trim strip (4) on rear-end door paneling as shown, center and mark installation position using suitable adhesive tape (5). | ||
7 | Carefully cut adhesive tape (5) in marked area (arrow) and remove trim strip (4). | Carefully cut adhesive tape (5). Otherwise the rear-end door paneling below can be damaged. | |
8 | Remove protective foil on adhesive strip from trim strip (4), center trim strip (4) according to the two halves of adhesive strip (5) and press on. | ||
9 | Enter retrofitted equipment in Vehicle Documentation (VeDoc) | Attach note "Chrome package retrofitted according to AZ88.00-P-0002MCC" to field organization texts for design group 88. |
Parts ordering notes
Part no. | Designation | Quantity |
DG 98 (see EPC) | Chrome package parts kit | 1 |