az8370s001301a

Retrofitting stationary heater radio remote control receiver

Typ az · temat 83.70 · wersja 0100 · 2000-05-23

Dotyczy: MODEL 638.064 /074 /164 /174 /274 as of 1.4.99, 638.094 /194 /294 with retrofitted water heater MODEL 638.094 /194 /294 retrofitted stationary heater converted from heater booster MODEL 638.014 /034 /064 /074 /114 /134 /164 /174 /214 /234 /244 /274 as of 1.4.99, 638.094 /194 /294 with CODE (H12) Warm water auxiliary heater MODEL 638.014 /034 /064 /074 /114 /134 /164 /174 /214 /234 /244 /274 as of 1.4.99, 638.094 /194 /294 with CODE (HZ5) Warm air auxiliary heater 10 kW with timer

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 638 (modele 014, 034, 064, 074, 094, 114, 134, 164, 174, 194, 214, 234, 244, 274, 294)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.3 Pofabryczny montaż/przebudowa — Seria 638 (modele 014, 034, 064, 074, 094, 114, 134, 164, 174, 194, 214, 234, 244, 274, 294)

AZ83.70-S-0013-01A

Retrofitting stationary heater radio remote control receiver

Models 638.064/074/164/174/274 as of 01.04.99 and models 638.094/194/294 with retrofitted water heater

Models 638.094/194/294 retrofitted stationary heater converted from heater booster

Models 638.014/034/064/074/114/134/

164/174/214/234/244/274 as of 01.04.99 and models 638.094/194/294 with Code H12 or Code HZ5

Retrofitting stationary heater radio remote control receiver

S83.70-4040-11

1 Install radio remote control receiver for stationary heater (1) in a free space on the control-module bracket on the right below the instrument panel.

Use the existing mounting holes to install it.

2 Install antenna line (2) in suitable place as high up as possible below the instrument panel.

Do not alter the length of the antenna line.

When installing the antenna line make sure that the screened end of the cable is at least a distance of 100 mm away from any metal parts.