W82.85-1485-11
1 Insert assembly frame (10) into stowage box (11).
2 Route FleetBoard preinstallation wiring harness (2), DispoPilot wiring harness (4) and antenna lines (5) through installation opening in assembly frame (10).
3 Bolt assembly frame (10) to stowage box (11) using cap nuts (arrows).
Ensure that none of the electrical lines is pinched.
W82.85-1486-11
4 Position ball joint (12) on stowage tray of instrument panel and transfer hole pattern of ball joint (12) onto instrument panel (arrows).
5 Drill 4 holes of dia. 5.5 mm at marked points.
Pay attention to electrical lines in area of bore holes.
W82.85-1487-11
6 Bolt ball joint (12) to instrument panel using attachment plate (13).
W82.85-1433-01
7 Adhere FleetBoard cradle adhesive label (3.1) to mounting face of cradle (3).
W82.85-1488-11
8 Attach ball joint (14) to cradle (3).
Always use screws from parts kit, as these are screws with inch thread.
W82.85-1436-01
9 Adhere FleetBoard battery adhesive label (1.2) to battery (1.1) of DispoPilot (1).
10 Insert battery (1.1) into DispoPilot (1).
The method for inserting the battery (1.1) is described in the owner's manual for the DispoPilot (1).