az8285s001201e

Retrofit antenna module for Communication and Navigation System (CNS) with digital radio (DAB)

Typ az · temat 82.85 · wersja 0100 · 2018-03-27

Dotyczy: Model 447.6/7 with code JF1 (rain sensor)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.85 Systemy nawigacyjne i komunikacyjne — Seria 447 (modele 6**, 7**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.80 Antena/ wzmacniacz anteny › 31.80.3 Pofabryczny montaż/przebudowa — Seria 447 (modele 6**, 7**)

AZ82.85-S-0012-01E

Retrofit antenna module for Communication and Navigation System (CNS) with digital radio (DAB)

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Model

447.6/7

with code JF1 (rain sensor)

Retrofit antenna module for Communication and Navigation System (CNS) with digital radio (DAB)

S82.85-4616-08

1

Loosen tape (1) at right A-pillar and detach electrical plug (2).

2

Attach antenna module (3) to right A-pillar and fasten with integrated screw.

3

Attach electrical plug (2) to antenna module (3).

4

Route electric line for antenna module (3), as shown, from right A-pillar inside the instrument panel up to installation location of the Communication and Navigation Systems (CNS) head unit.

Do not kink electric line and ensure that it is routed without any chafing.
Prevent damage.

5

Secure electric line for antenna module (3) section by section using cable ties at factory-installed electrical wiring harness.

6

Attach plug holder (4) to antenna module (3).

The connector socket (5) of the electric line for the antenna module (3) is attached during installation of the CNS head unit.

Powiązane dokumenty