az8285s000802e

Connect and install Communication and Navigation System (CNS)

Typ az · temat 82.85 · wersja 0100 · 2018-03-27

Dotyczy: Model 447.6/7

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.85 Systemy nawigacyjne i komunikacyjne — Seria 447 (modele 6**, 7**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.10 Headunit › 31.10.3 Pofabryczny montaż/przebudowa — Seria 447 (modele 6**, 7**)

AZ82.85-S-0008-02E

Connect and install Communication and Navigation System (CNS)

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Model

447.6/7

Connect and install Communication and Navigation System (CNS)

Connection scheme

1

Communication and Navigation System (CNS) head unit

2

CAN adapter

3

Vehicle wiring harness

3.1

Black plug holder

4

CAN cable

4.1

Black 16-pin connector socket

4.2

Black plug

5

Jack plug

S82.85-4589-05

Connect and install Communication and Navigation System (CNS)

1

Model 447.6/7
with code FR8 (Rear view camera)
Install blue connector socket (22) of adapter cable (21) at green connect socket holder (23) of reversing camera.


Shown on model 447.7 with code EN7 (Audio 15) and with code FR8 (Reversing camera)

3.1

Black plug holder

16

Components plug

21

Adapter cable (with code FR8 (Reversing camera))

22

Blue connector socket (with code FR8 (Reversing camera))

23

Green connector socket holder (with code FR8 (Reversing camera))

S82.85-4614-11

Connect and install Communication and Navigation System (CNS)

S82.85-4609-08

Shown on model 447.7 with code EN7 (Audio 15)

3.1

Black plug holder

11

Jack plug

14

Main wiring harness

9

Black antenna coupling

12

USB plug

16

Components plug

10

Green connector socket

13

Cable tie

17

Connector socket

2

Remove cable tie (13) at main wiring harness (14).

3

Route main wiring harness (14) in device installation frame inward and fix in place with cable ties (13) at crossmember under instrument panel.

This allows installation in the device installation frame.

4

Guide electrical lines outward as shown.

This facilitates connecting the electric lines.

Connect and install Communication and Navigation System (CNS)

5

Model 447.6/7
with code EN6 (Audio 10)
except code ER0 (Basic fittings f. radio)
Model 447.6/7
with code EN7 (Audio 15)
except code ER0 (Basic fittings f. radio)
Attach blue connector socket (6.2) of CNS head unit (1) to black antenna coupling (9).



6

Attach black plug (4.2) of CNS head unit (1) to black plug holder (3.1).


To do so, bring CNS head unit (1) into the area of the device installation frame.


Shown on model 447.7 with code EN7 (Audio 15) and with code FR8 (Reversing camera)

1

CNS head unit

2

CAN adapter

3

Vehicle wiring harness

3.1

Black plug holder

4.1

Black 16-pin connector socket

4.2

Black plug

5

Jack plug

6.1

Antenna plug

6.2

Blue connector socket

9

Black antenna coupling

10

Green connector socket

11

Jack plug

12

USB plug

16

Components plug (with code FR8 (Reversing camera))

17

Connector socket

S82.85-4610-06

Connect and install Communication and Navigation System (CNS)

S82.85-4623-08

Shown on model 447.7 with code ER0 (Pre-installation for radio)

2

CAN adapter

4

CAN cable

6

Antenna adapter

3.1

Black plug holder

4.2

Black plug

9

Black antenna coupling

7

Model 447.6/7
with code ER0 (Basic fittings f. radio)
except code EN6 (Audio 10)
except code EN7 (Audio 15)
Attach antenna adapter (6) of CNS head unit (1) to black aerial coupling (9).

Connect and install Communication and Navigation System (CNS)

Shown on model 447.7 with code EN7 (Audio 15) and with code FR8 (Reversing camera)

1

CNS head unit

2

CAN adapter

3

Vehicle wiring harness

3.1

Black plug holder

4.1

Black 16-pin connector socket

4.2

Black plug

5

Jack plug

6.1

Antenna plug

6.2

Blue connector socket

9

Black antenna coupling

10

Green connector socket

11

Jack plug

12

USB plug

16

Components plug (with code FR8 (Reversing camera))

17

Connector socket

S82.85-4610-06

8

Attach green connector socket (10) of GPS antenna to CNS head unit (1).

9

Attach jack plug (11) of hands-free system microphone to CNS head unit (1).

10

Install USB plug (12) according to the markings made previously.

USB ports are marked by impressed numbering 1 and 2 on the back of the CNS head unit (1).

11

Model 447.6/7
with code FR8 (Rear view camera)
Attach components plug (16) of reversing camera to CNS head unit (1).

Use brown component input at CNS head unit (1).

12

Attach connector socket (17) of digital radio (DAB) antenna to CNS head unit (1).

When retrofitting CNS head unit (1) with DAB.

Connect and install Communication and Navigation System (CNS)

13

Install CNS head unit (1) with cover (18).


Make sure that no electric lines and component parts become damaged when inserting the CNS head unit (1).
Otherwise this can lead, among other things, to malfunctions of the CNS head unit (1).


Here, guide all attached electric lines in device installation frame toward rear.


1

CNS head unit

18

Cover

19

Bolts

20

Bolts

S82.85-4595-11

14

Fix CNS head unit (1) in place with screws (19, 20).

Model 447.6/7
with code EN6 (Audio 10)
except code ER0 (Basic fittings f. radio)
Model 447.6/7
with code EN7 (Audio 15)
except code ER0 (Basic fittings f. radio)
Use screws (19, 20) of the previously removed audio components.

Model 447.6/7
with code ER0 (Basic fittings f. radio)
except code EN6 (Audio 10)
except code EN7 (Audio 15)
Use screws (19, 20) of the previously removed stowage compartment.

Powiązane dokumenty