Retrofit navigation system

AZ82.85-P-2000MCC

Retrofit navigation system

21.7.11

13.1.11

Adaptation of audio settings added

Operation step 13



Remove

1

Remove center console cover (1)

AR68.20-P-2350MCF

2

Remove radio recess cover (2)

 The radio recess cover (2) is screwed down with four screws/bolts.

3

Remove cable tie (4) and expose smart Entry radio wiring harness (3)

4

Remove dashboard bottom section on passenger side (9)

Only if the wiring harness (8) is to be installed with the external USB connector connecting point (X115) and external audio source connecting point (X39/45).

* not for USA

AR68.10-P-1502MCC

* for USA only

AR68.10-P-1502MCU



Install

5

Insert wiring harness (8) with the external connector connecting point (X115) and the external audio source connecting point (X39/45) into the cutout at the passenger-side instrument panel lower section (9) and install the passenger-side instrument panel lower section (9)

Only if the wiring harness (8) is to be installed with the external USB connector connecting point (X115) and external audio source connecting point (X39/45).

 Route the wiring harness (8) with the external USB connector connecting point (X115) and the external audio source connecting point (X39/45) in the slot of the smart Premium radio (A2/4).
If a glove box (10) is also to be installed in the course of retrofitting the wiring harness (8), a different passenger-side instrument panel lower section (9) must be installed.

* not for USA

AR68.10-P-1502MCC

* for USA only

AR68.10-P-1502MCU

6

Install GPS antenna (A2/23)

AR82.85-P-0002MCC

7

Install smart Premium radio (A2/4)

* not for USA

AR82.60-P-7502MCC

* for USA only

AR82.60-P-7502MCU

8

Install center console cover (1)

AR68.20-P-2350MCF

9

Connect Star Diagnosis

AD00.00-P-2000-04MCC

10

Enter special equipment on the vehicle data card and the online vehicle data card

 Add code (527) High-Line radio.

11

Disconnect Star Diagnosis

AD00.00-P-2000-04MCC

12

Enter security code of smart Premium radio (A2/4), change if necessary

 The security code is set to "0000" by default at the factory. If the security code is to be changed, it must be documented in writing.

13

Adapt audio settings



Notes on audio settings

AH82.60-P-0002-01MCC

14

Document retrofitted equipment using vehicle documentation (VeDoc)

 Attach note "smart Premium radio retrofitted as per AZ82.85-P-2000MCC" as well as serial number of smart Premium radio (A2/4) below field organization texts to design group 82.

Part no.

Designation

Quantity

smart Premium radio retrofit scope

DG 82 (see EPC)

smart Premium radio

1

DG 82 (see EPC)

Operator's manual for smart Premium radio

1

DG 82 (see EPC)

GPS antenna

1

Also for retrofitting external USB connector connecting point and external audio source connecting point

DG 82 (see EPC)

Wiring harness with external USB connector connecting point and external audio source connecting point

1

DG 68 (see EPC)

Passenger-side instrument panel lower section (note equipment variants)

1

Also for retrofitting glove box

DG 68 (see EPC)

Glove compartment

1