S82.80-4001-12
The figure shows sockets in combination with an auxiliary socket installed at factory.
1 Socket for power supply
2 Telephone socket
| Removal | ||
1 | Remove side access plate and top cover from driver's seat frame. | ||
2 | Disconnect ground cable from battery | ||
3 | Remove door sill molding from driver's door. | ||
4 | Remove wheelhouse cover and paneling below instrument panel in driver's footwell. | ||
5 | Remove radio antenna without D-network splitter from left fender, if installed. | ||
| Installation | ||
6 | Install automatic antenna with D-network splitter for radio and telephone reception in left fender. | ||
7 | Route antenna lead for automatic antenna via left wheelhouse downward into footwell and route below floor covering into driver's seat frame. | ||
8 | Retrofit business console sockets | ||
9 | Reassemble vehicle | ||
10 | Connect business console to power supply and telephone sockets and check for proper function. |
Parts ordering notes
Part no. | Designation | Quantity |
1037 | Business console pre-equipment set The pre-equipment set listed under the specified part no. can only be obtained from the FreeCom company. |