AZ82.64-S-0001A | Retrofit CD changer | 25.9.00 |
MODEL 638
with CODE (EF6) Sound 20 radio
with CODE (EF7) Sound 30 radio
with CODE (EG2) Sound 20 radio with cassette drive and 5 speakers
with CODE (EG3) Sound 30 radio with single CD drive and 5 speakers
with CODE (ET8) Sound 30 Auto pilot system (APS) with 2 speakers
with CODE (ET9) Sound 30 Auto pilot system (APS) with 5 speakers
S82.64-4001-06
1 Radio
2 Wiring harness
3 Fiber optic cable
(only with code ET8 and ET9, Sound 30 radio (APS)
4 CD changer
| Remove | ||
1.1 | Remove seat and console | Front passenger individual seat | |
| |||
1.2 | Remove front passenger double seat | Model 638.0/1 with code S23, two-seater front passenger seat. | |
2 | Remove mounting console in footwell underneath the radio, if equipped | ||
3 | Remove door sill molding from front passenger door | ||
4 | Remove cover from chassis no. | Left-hand steering | |
5 | Switch off radio | ||
6 | Remove radio | With code EF6, EF7, EG2 or EG3, Sound 20 or 30 radio: With code ET8 or ET9, Sound 30 radio APS: | |
| Install | ||
7 | Retrofit CD changer wiring harness | With code EF6, EF7, EG2 or EG3, Sound 20 or 30 radio | |
With code ET8 or ET9, Sound 30 radio APS Do not remove fiber optic cable covers and equipment connection stop plugs until right before connection takes place. Route fiber optic cable with step protection, do not kink, and avoid routing radii < 25 mm. | |||
8 | Install front passenger seat console | Front passenger individual seat | |
9.1 | Retrofit CD changer in front passenger seat console | Front passenger individual seat | |
9.2 | Retrofit CD changer on cab floor | Model 638.0/1 with code S23, two-seater front passenger seat. | |
Sealing compound | |||
10 | Install front passenger double seat | Model 638.0/1 with code S23, two-seater front passenger seat. | |
11.1 | Connect wiring harness of CD changer to radio and install radio | With code EF6, EF7, EG2 or EG3, Sound 20 or 30 radio | |
11.2 | Connect connector C and the fiber optic cable to radio and then install radio | With code ET8 or ET9, Sound 30 radio APS. | |
12.1 | Connect wiring harness to the CD changer | With code EF6, EF7, EG2 or EG3, Sound 20 or 30 radio | |
12.2 | Connect wiring harness and fiber optical cable to the CD changer | With code ET8 or ET9, Sound 30 radio APS. | |
13 | Check function of CD changer as per the operating instructions | ||
14 | Install remaining parts onto vehicle | ||
15 | Lift up vehicle and coat area of CD changer mounting on vehicle's underfloor with sealing compound | Model 638.0/1 with code S23, two-seater front passenger seat. |
Front seats
Number | Designation | Model 638.0/1 | Model 638.2 | ||
BA91.10-N-1005-01A | Bolt, front seat console to body | Nm | 30 | 30 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1014-01A | Adhesive tape | A 000 989 98 85 |
Parts ordering notes
Part no. | Designation | Quantity |
B6 656 02 66 | CD changer for code EF6, EF7, EG2 and EG3, Sound 20 or 30 radio | 1 |
B6 656 02 67 | CD changer for code ET8 and ET9, Sound 30 radio APS | 1 |
A638 820 00 14 | Left CD changer bracket for installation of CD changer in front passenger seat console | 1 |
A638 820 01 14 | Right CD changer bracket for installation of CD changer in front passenger seat console | 1 |
N000 965 006 109 | CD changer bracket bolt for installation of CD changer in front passenger seat console | 3 |