P82.62-2586-04
1 Secondary arrest
2 Speaker plug
3 Contact pin for speaker cable
4 Instrument panel
P82.62-2587-03
P82.62-2588-06
4 Instrument panel
5 Housing lower part
6 Speaker line
7 Tubing
H4/33 Left tweeter
H4/34 Right tweeter
| Remove | ||
1.1 | Remove footwell cover on driver side | Only models 450.33 /34 /35 /44 /45 as of 11.01.00 and models 450.30 /40 as of 15.11.99. | |
| Remove/install footwell cover on driver's side | ||
2.1 | Remove footwell cover on front passenger side | Only models 450.33 /34 /35 /44 /45 as of 11.01.00 and models 450.30 /40 as of 15.11.99. | |
| Remove/install footwell cover on passenger side | ||
3 | Remove radio | ||
| Remove/install radio | ||
| Install | ||
4.1 | Retrofit amplifier | Only radio (DFO/FFO), code C01, radio with cassette (DFO/FFO), code C02, radio CD (DFO/FFO), code C16. | |
5 | Remove secondary locking (1) on speaker plug (2) | ||
6 | Insert contact pin for speaker cable (3) in pairs to plug speaker (2) | ||
7 | Mount secondary locking (1) on speaker plug (2) | ||
8 | Fit cable duct for speaker cable (6) to instrument panel (4) at left and right | See marking Fig. A. Positions are prestamped. They are located on the left side at the left of the bore and on the right side at the right of the bore. | |
9 | Mount housing bottom section (5) | ||
10 | Install left tweeter (H4/33) and right tweeter (H4/34) with speaker cable (6) in the housing bottom section (5) | Soldering contacts must face in opposite direction to windshield. Lock left tweeter (H4/33) and right tweeter (H4/34) by turning housing bottom section (5) to the left. | |
11 | Connect speaker cable (6) | Picture B. Slide hose (7) over the connecting point. | |
12 | Route speaker cable (6) to main wiring harness | Speaker cable (6) must be routed and affixed such that damage and vibration noise are ruled out. | |
13 | Install radio | Ensure that the radio code is available. | |
| Remove/install radio | ||
14.1 | Install footwell cover on front passenger side | Only models 450.33 /34 /35 /44 /45 as of 11.1.00 and models 450.30 /40 as of 15.11.99. | |
| Remove/install footwell cover on passenger side | ||
15.1 | Install footwell cover on driver's side | Only models 450.33 /34 /35 /44 /45 as of 11.1.00 and models 450.30 /40 as of 15.11.99. | |
| Remove/install footwell cover on driver's side | ||
Concluding work | |||
16.1 | Carry out system calibration | Only for radio CD (DFO/FFO), code C16. | |
Press and hold down the "Sound" button when switching on until "Sound ON" appears in the display. | |||
17.1 | Add special equipment to the vehicle data card and to the online vehicle data card | Only at workshops without DMS Autoline 8.0 dealer system. | |
Sound package (2 tweeters, 2 bass reflex boxes and diplexer) (FFO), code C17. |