P82.60-8324-08
1 | Center console cover | 3 | smart Entry radio wiring harness | ||||
2 | Radio recess cover | 4 | Cable tie |
Parts scope for smart Entry radio (A2/3) |
5 | Operating instructions |
6 | Center stowage compartment |
7 | Center console cover |
A2/3 | smart Entry radio |
P82.60-8325-06
P82.60-8326-07
Parts scope for external USB connector connecting point (X115) and external audio source connecting point (X39/45) |
8 | Wiring harness | 10 | Glove compartment | X115 | External USB connector connecting point | ||
9 | Dashboard lower section on passenger side | X39/45 | External audio source separation point |
| Remove | ||
1 | Remove center console cover (1) | ||
| |||
2 | Remove radio recess cover (2) | The radio recess cover (2) is screwed down with four screws/bolts. | |
3 | Remove cable tie (4) and expose smart Entry radio wiring harness (3) | ||
4 | Remove dashboard bottom section on passenger side (9) | Only if the wiring harness (8) with the external USB connector connecting point (X115) and external audio source connecting point (X39/45) is to be installed. | |
| MODEL 451.3 (except 451.39) as of 8/31/10, 451.4 (except 451.49) as of 8/31/10 | ||
| MODEL 451.3 (except 451.39) as of 8/31/10, 451.4 (except 451.49) as of 8/31/10 | ||
| Install | ||
5 | Insert wiring harness (8) with the external USB connector connecting point (X115) and the external audio source connecting point (X39/45) in the cutout at the passenger-side instrument panel lower section (9) and install the passenger-side instrument panel lower section (9) | Only if the wiring harness (8) with the external USB connector connecting point (X115) and external audio source connecting point (X39/45) is to be installed. | |
| MODEL 451.3 (except 451.39) as of 8/31/10, 451.4 (except 451.49) as of 8/31/10 | ||
| MODEL 451.3 (except 451.39) as of 8/31/10, 451.4 (except 451.49) as of 8/31/10 | ||
Route the wiring harness (8) with the external USB connector connecting point (X115) and the external audio source connecting point (X39/45) into the slot of the smart Entry radio (A2/3). If a glove box (10) is also to be installed in the course of retrofitting the wiring harness (8), a different passenger-side instrument panel lower section (9) must be installed. | |||
6 | Install smart Entry radio (A23) and center stowage compartment (6) | ||
| MODEL 451.3 (except 451.39) as of 8/31/10, 451.4 (except 451.49) as of 8/31/10 | ||
| MODEL 451.3 (except 451.39) as of 8/31/10, 451.4 (except 451.49) as of 8/31/10 | ||
7 | Install center console cover (7) | ||
| |||
8 | Enter special equipment in online vehicle data card via vehicle documentation system (VeDoc) | Add CODE 516 (RADIO WITH USB INTERFACE). | |
9 | Document retrofitted equipment in VeDoc | Attach "smart Entry radio retrofitted as per AZ82.60-P-0003MCD " note and the serial number of the smart Entry radio (A2/3) under field organization text to DG 82. | |
10 | Perform function test | See Owner's Manual. |
Parts ordering note |
Part no. | Designation | Quantity |
smart Entry radio retrofit scope | ||
KG 82 (siehe EPC) | smart Entry radio | 1 |
KG 82 (siehe EPC) | Operator's manual for smart Entry radio | 1 |
KG 68 (siehe EPC) | Center console cover | 1 |
KG 68 (siehe EPC) | Center stowage compartment | 1 |
Also for retrofitting external USB connector connecting point and external audio source connecting point | ||
KG 82 (siehe EPC) | Wiring harness with external USB connector connecting point and external audio source connecting point | 1 |
KG 68 (siehe EPC) | Passenger-side instrument panel lower section (note equipment variants) | 1 |
Also for retrofitting glove box | ||
KG 68 (siehe EPC) | Glove compartment | 1 |