P68.30-3513-11
Trim parts
1 Left front door panel cover
2 Right front door panel cover
3 Selector lever cover
4 Combination switch caps
5 Instrument cluster covering
6 Additional instrument covers
(with code (V31) Cockpit clock and tachometer package)
P68.30-3514-09
1 Left front door panel cover
2 Right front door panel cover
3 Selector lever cover
4 Combination switch cap
5 Instrument cluster covering
S4 Combination switch
6 Additional instrument covers (with code (V31) Cockpit clock and tachometer package)
7 Door trim
8 Assembly wedge
| Remove | ||
1 | Unclip left front door panel cover (1) and right front door panel cover (2) from front area of door panel (7) with assembly wedge (8) | First loosen left front door panel cover (1) and right front door panel cover (2) in lower area with assembly wedge (8) as shown. | |
Assembly wedge | |||
2 | Push left front door panel cover (1) and right front door panel cover (2) toward front and guide out of door paneling (7) in rear area (arrow A). | ||
3 | Remove selector lever cover (3) | * not for USA | |
* for USA only | |||
4 | Loosen combination switch caps (4) from combination switch (S4) with suitable knife and remove | Ensure that combination switch (S4) is not damaged. | |
5 | Unclip combination switch cover (5) from instrument cluster with assembly wedge (8) and remove. | Assembly wedge | |
6 | Unclip additional instrument covers (6) from cockpit clock and tachometer with assembly wedge (8) and remove | With code (V31) Cockpit clock and tachometer package | |
Assembly wedge | |||
7 | Install in the reverse order | Replace corresponding trim parts with new trim parts | |
8 | Clean installed trim parts with cleaning agent approved by Daimler AG |
Mounting wedge
110 589 03 59 00