Parts scope for additional instrument (A15) |
1 | Screw |
2 | Cover |
A15 | Additional instruments |
P54.32-8886-05
P54.32-8887-08
3 | Cover | 4 | Clip remover |
P54.32-8888-09
1 | Screw | 6 | Wiring harness for additional instruments | A15 | Additional instruments | ||
2 | Cover | 6.1 | Black 3-pin connector | A15x1 | Additional instruments connector | ||
5 | Black 3-pin plug | A1 | Instrument cluster |
| Remove | ||
1 | Adjust driver seat to the rear | ||
2 | Remove instrument cluster (A1) | ||
| MODEL 451.3/4 as of 8/31/10 | ||
| MODEL 451.3/4 as of 8/31/10 | ||
3 | Release cover (3) using clip remover (4), as shown, and remove | Clip remover | |
| Install | ||
4 | Slide additional instrument wiring harness (6) through opening on left and under cover (3) toward instrument cluster (A1) | ||
5 | Clip additional instruments (A15) into instrument panel | ||
6 | Bend into footwell and route additional instrument wiring harness (6) at bottom of instrument panel upper part toward instrument cluster (A1) | ||
7 | Hook wiring harness for additional instruments (6) into holders (arrow C and B) at bottom on instrument panel upper section | ||
8 | Detach black, 3-pin connector (5) from vehicle wiring harness in area of instrument cluster (A1) | ||
9 | Connect black, 3-pin connector (5) and black, 3-pin coupling (6.1) of wiring harness for additional instruments (6) | The additional instruments connector (A15x1) is now complete. | |
10 | Use bolt (1) to tighten additional instruments (A15) | ||
11 | Clip cover (2) over the bolt (1) on the additional instruments (A15) | ||
12 | Move driver seat back to its default position | ||
13 | Install in the reverse order | ||
14 | Set clock of additional instruments (A15) | ||
15 | Enter special equipment in online vehicle data card via vehicle documentation system (VeDoc) | Enter CODE V31 (Cockpit and tachometer package). | |
16 | Document retrofitted equipment in VeDoc | Attach a note "Additional instrument retrofitted as per AZ54.30-P-0001MCD" under field organization texts for DG 54. | |
17 | Perform function test |
452 589 01 63 00
Clip remover