P65.00-2122-09
1 | Template | B | 400 mm | D | Cutting contour | ||
A | 200 mm | C | 100 mm |
1 | Determine dimension "A" from the drawing. |
2 |
Determine scaling factor "x": Specified dimension "A"/Determined dimension "A" = Scaling factor "x" |
3 | Copy template (1) to original size with determined scaling factor "x". |
4 | Check dimension "C" for verification. |
Dimension "C" measures 100 mm if the template (1) has been correctly enlarged. |
5 | Cut out template (1) along cutting contours (D). |
6 | Align template (1) on both sides at the roof cutout in the area of the C-pillar to the inner body profile and transfer contour to body flange. |
Use suitable pen. |