ar9800p0900mcc

Paintwork bonding area for windshield

Typ ar · temat 98.00 · wersja 0102 · 2019-05-14

Dotyczy: Model 451.3/4

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 98 Lakierowanie › 98.00 Informacje ogólne — Seria 451 (modele 3**, 4**)

EinPAS 40 Konserwacja/ lakierowanie › 40.15 Lakierowanie/ konserwacja lakieru › 40.15.30 Konserwacja lakieru/konserwacja chromów/folie/zabezpieczenie transportowe — Seria 451 (modele 3**, 4**)

AR98.00-P-0900MCC

Paintwork bonding area for windshield

29.04.2019

Model

451.3/4

Paintwork bonding area for windshield

Shown on model 451.3

1

Windshield bonding area

2

Body flange

P98.10-2085-06

Paint

Notes on repair paintwork in bonding area of windows and components

AH98.00-P-9408-07MCC

1

Mask off vehicle interior and glue in

Overview of smart materials and their use

AR98.00-P-0270MCC

2

Mask off outer area and remaining component parts, then glue-in

On vehicles with preceding body repairs, the cover area must be adapted to the repair process.

3

Grind down body flange (2) and bonding area on windshield (1)

Residual coating thickness approx. 20 μm.
In the windshield bonding area (1), the entire paintwork structure up to the electrophoretic immersion paint must be ground down. Grinding all the way down to the sheet steel is acceptable.

4

Completely clean painting area

The paint manufacturer's specifications must be complied with in full.

5

Degrease painting area

The paint manufacturer's specifications must be complied with in full.
If glue has flaked off, repeat operation step 1 and 2 if necessary.

6

Apply EP primer filler

General information on MB materials

AH98.00-P-9409-03A

Apply to the entire area to be painted. Use approved materials only. The paint manufacturer's specifications must be complied with in full.

7

Cover up windshield bonding surface (1)

AR98.00-P-0900-01MCC

If necessary, remove any protruding markings. Only use materials approved by the paint manufacturers.

Tesa 7140 adhesive tape (12 mm)

*BR00.45-Z-1134-02A

8

Apply base coat and clear varnish of selected paint system

General information on MB materials

AH98.00-P-9409-03A

The paint manufacturer's specifications must be complied with in full.

9

Perform over drying

Topical note

Notes on force drying of vehicle paints

AH98.00-P-9408-03A

The paint manufacturer's specifications must be complied with in full.

10

Remove masking and bonding material

Repair materials

Number

Designation

Order number

BR00.45-Z-1134-02A

Tesa 7140 adhesive tape (12 mm)

A 009 989 10 85

Powiązane dokumenty