Variants of cavity preservation |
A | Cavity preservation in folding areas and hollow cavities |
B | Cavity preservation for inner surfaces and gaps |
P97.20-2542-01
Engine hood |
P97.20-2705-11
Trunk lid |
P97.20-2749-11
Front fender |
P97.20-2750-11
Front door |
P97.20-2751-11
Rear door |
P97.20-2752-11
Front longitudinal member |
P97.20-2710-11
P97.20-2753-09
Upper front longitudinal member, A-pillar, B-pillar, C-pillar, side wall paneling and bottom side longitudinal member |
Rear longitudinal member |
P97.20-2754-11
Rear area |
P97.20-2755-11
P97.20-2714-09
Underbody |
Picture no., etc. | Work notes | ||
Danger | Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents | Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection. | |
Topical note | Notes on cavity preservation | ||
A | Cavity preservation in folding areas and hollow cavities | Install from inside through openings (arrows) with hook probe. Apply cavity preservation with spraying hose and nozzle (spraying angle 360°) as far as possible into cavities. | |
Cavity preservation (free of solvents), 1 liter | |||
B | Cavity preservation for inner surfaces and gaps | Uniformly moisten cavity preservation. | |
Cavity preservation (free of solvents), 1 liter |
Powiązane dokumenty
- ah9720p000101b Wskazówki dotyczące konserwacji profili zamkniętych
- as9700z000101a Niebezpieczeństwo wybuchu i zatrucia oparami rozpuszczalników i gazami. Niebezpieczeństwo obrażeń oczu i skóry podczas obróbki środków antykorozyjnych.