ar9175s9870ee

Remove/install cover for bed extension

Typ ar · temat 91.75 · wersja 0101 · 2015-08-10

Dotyczy: Model 447.8 with code ZK7 (Equipment line MARCO POLO)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.75 Leżanki — Seria 447 (modele 8**)

EinPAS 37 Wyposażenie wnętrza › 37.40 Łóżko/leżanka/kabina sypialna › 37.40.30 Leżanka/ łóżko — Seria 447 (modele 8**)

AR91.75-S-9870EE

Remove/install cover for bed extension

24.7.15

Model

447.8

with code ZK7 (Equipment line MARCO POLO)

Remove/install cover for bed extension

S91.75-4524-09

1

Cover

4

Cushion padding

2

Cover

6

Zipper

3

Zipper

Remove/install cover for bed extension

S91.75-4525-09

7

Bolts

10

Support brace

13

Bracket

8

Bolts

11

Stop buffer

15

Padding frame

9

Pivot bearing

12

Bracket

Remove/install cover for bed extension

S91.75-4526-09

2

Cover

14

Clamping strips

15

Padding frame

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove bed extension

AR91.75-S-0010E

2

Remove chair bag from support (10)

Model 447.8
with code YF0 (Camping table and 2 chairs)
with code ZK7 (Equipment line MARCO POLO)

3

Remove camping table from padding frame (15)

Model 447.8
with code YF0 (Camping table and 2 chairs)
with code ZK7 (Equipment line MARCO POLO)

4

Open zipper (3) and remove cushion padding (4) with cover (1)

5

Open zipper (6) and remove cover (1) from cushion padding (4)

Installation: Ensure cover (1) is seated correctly in area of contours (arrows A) of cushion padding (4).

6

Remove bolts (7)

7

Remove screws/bolts (8) and remove hinge (9)

8

Remove support (10) from padding frame (15)

9

Remove stop buffer (11) from padding frame (15)

10

Remove bracket (12) from padding frame (15)

11

Remove bracket (13) from padding frame (15)

12

Open Velcro fasteners (arrows B) and unhook clamping strips (14) of cover (2)

Installation: Turn clamping strips (14) inwards and hook onto padding frame (15).
Ensure that there are no creases in the cover (2).
Align cover (2) with the threaded holes of the padding frame (15).

If cover (2) is being replaced:

After cover (2) has been fitted to padding frame (15) and is correctly seated without creases, the small slots for the threaded connections of the detachable parts must be made in the new cover (2) with a suitable tool.

13

Remove cover (2) from padding frame (15)

14

Install in the reverse order

Powiązane dokumenty