S91.60-4638-07
1 | Cover | 3 | Screw | 5 | Strut | ||
2 | Electrical connector | 4 | Frontal acceleration sensor |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Disconnect ground line on on-board electrical system battery | ||
2 | Remove cover (1) | ||
3 | Disconnect electrical connector (2) | ||
4 | Remove screw (3) | ||
Topical note | Notes on self-locking nuts and bolts | ||
Screw, frontal acceleration sensor to strut | |||
5 | Unclip and remove frontal acceleration sensor (4) on strut (5) | ||
6 | Install in the reverse order | ||
| Check | ||
7 | Check Supplemental Restraint System (SRS) with diagnostic system | After replacement of frontal acceleration sensor (4). | |
|
Powiązane dokumenty
- ad0000s200006p
- ah0000n000101a Wskazówki dotyczące samozabezpieczających śrub i nakrętek
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar5410s0003p
- ar8840s400102p
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.