ar9160s0740e

Remove/install windowbag sensor

Typ ar · temat 91.60 · wersja 0203 · 2016-01-19

Dotyczy: Model 447 with code SH8 (Windowbags for driver, front passenger and rear) except code ZU7 (National version for Canada) except code ZU8 (National version for USA) Model 448.8 with code SH8 (Windowbags for driver, front passenger and rear)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.60 Poduszki powietrzne, system ochrony pieszych — Seria 447 · Seria 448 (modele 8**)

EinPAS 27 Bezpieczeństwo bierne/ systemy zabezpieczające przed skutkami wypadków › 27.16 Poduszka powietrzna › 27.16.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 447 · Seria 448 (modele 8**)

AR91.60-S-0740E

Remove/install windowbag sensor

14.12.2015

Model

447

with code SH8 (Windowbags for driver, front passenger and rear)

except code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

Model

448.8

with code SH8 (Windowbags for driver, front passenger and rear)

Remove/install windowbag sensor

Shown on left side of vehicle with removed rear quarter in rear compartment

1

Electrical connector

2

Screw

3

C-pillar

B164/2

Left C-pillar body acceleration sensor

B164/3

Right C-pillar body acceleration sensor

S91.60-4597-06

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and remove transmitter key

2

Detach rear quarter in rear compartment on each side of vehicle, until the left C-pillar body acceleration sensor (B164/2) or the right C-pillar body acceleration sensor (B164/3) is accessible

Model 447.7
with code SH8 (Windowbags for driver, front passenger and rear)
with code V23 (Interior panelling higher execution)
except code ZU7 (National version for Canada)
except code ZU8 (National version for USA)
Model 447.8
with code SH8 (Windowbags for driver, front passenger and rear)
except code ZK7 (Equipment line MARCO POLO)
except code ZU7 (National version for Canada)
except code ZU8 (National version for USA)
Model 448.8
with code SH8 (Windowbags for driver, front passenger and rear)

AR68.30-S-1206E

3

Disconnect electrical connection (1) of left C-pillar body acceleration sensor (B164/2) or right C-pillar body acceleration sensor (B164/3)

4

Remove screw/bolt (2) and remove left C-pillar body acceleration sensor (B164/2) or right C-pillar body acceleration sensor (B164/3)

Note installation position of left C-pillar body acceleration sensor (B164/2) or right C-pillar body acceleration sensor (B164/3).

Bolt, windowbag sensor to C-pillar

*BA91.60-N-1009-01G

5

Install in the reverse order

Check

6

Check Supplemental Restraint System (SRS) with diagnostic system

When the left C-pillar body acceleration sensor (B1642) or right C-pillar body acceleration sensor (B164/3) was replaced.

AD00.00-S-2000-04E

Airbag

Number

Designation

Model 447, 448

BA91.60-N-1009-01G

Bolt, windowbag sensor to C-pillar

Nm

8

Powiązane dokumenty