ar9160s0730e

Remove/install sensor for sidebag/windowbag

Typ ar · temat 91.60 · wersja 0202 · 2015-12-17

Dotyczy: Model 447 with code SH1 (Thorax/pelvis side-impact airbag, driver) except code ZU7 (National version for Canada) except code ZU8 (National version for USA) Model 447 with code SH2 (Thorax/pelvis side-impact airbag, front passenger) except code ZU7 (National version for Canada) except code ZU8 (National version for USA) Model 447 with code SH8 (Windowbags for driver, front passenger and rear) except code ZU7 (National version for Canada) except code ZU8 (National version for USA) Model 447 with code SH9 (

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.60 Poduszki powietrzne, system ochrony pieszych — Seria 447 · Seria 448

EinPAS 27 Bezpieczeństwo bierne/ systemy zabezpieczające przed skutkami wypadków › 27.16 Poduszka powietrzna › 27.16.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 447 · Seria 448

AR91.60-S-0730E

Remove/install sensor for sidebag/windowbag

14.12.2015

Model

447

with code SH1 (Thorax/pelvis side-impact airbag, driver)

except code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

Model

447

with code SH2 (Thorax/pelvis side-impact airbag, front passenger)

except code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

Model

447

with code SH8 (Windowbags for driver, front passenger and rear)

except code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

Model

447

with code SH9 (Windowbag for driver and co-driver)

except code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

Model

448.8

with code SH1 (Thorax/pelvis side-impact airbag, driver)

Model

448.8

with code SH2 (Thorax/pelvis side-impact airbag, front passenger)

Model

448.8

with code SH8 (Windowbags for driver, front passenger and rear)

Model

448

with code SH9 (Windowbag for driver and co-driver)

Remove/install sensor for sidebag/windowbag

Shown on left side of vehicle

1

Electrical connector

2

Screw

3

B-pillar

B164

Left B-pillar body acceleration sensor

B164/1

Right B-pillar body acceleration sensor

S91.60-4596-06

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and remove transmitter key

2

Remove door sill on the respective vehicle side

AR68.30-S-4100E

3

Disconnect electrical connection (1) of left B-pillar body acceleration sensor (B164) or right B-pillar body acceleration sensor (B164/1)

4

Remove screw/bolt (2) and remove left B-pillar body acceleration sensor (B164) or right B-pillar body acceleration sensor (B164/1)

Note installation position of left B-pillar body acceleration sensor (B164) or right B-pillar body acceleration sensor (B164/1).

Bolt, windowbag sensor to B-pillar

*BA91.60-N-1003-01G

5

Install in the reverse order

Check

6

Check Supplemental Restraint System (SRS) with diagnostic system

When the left B-pillar body acceleration sensor (B164) or right B-pillar body acceleration sensor (B164/1) was replaced.

AD00.00-S-2000-04E

Airbag

Number

Designation

Model 447, 448

BA91.60-N-1003-01G

Bolt, windowbag sensor to B-pillar

Nm

8

Powiązane dokumenty