ar9160p0760lc

Remove/install side Supplemental Restraint System (SRS) pressure sensor

Typ ar · temat 91.60 · wersja 0101 · 2019-11-11

Dotyczy: Model 217

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.60 Poduszki powietrzne, system ochrony pieszych — Seria 217

EinPAS 27 Bezpieczeństwo bierne/ systemy zabezpieczające przed skutkami wypadków › 27.16 Poduszka powietrzna › 27.16.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 217

AR91.60-P-0760LC

Remove/install side Supplemental Restraint System (SRS) pressure sensor

19.09.2014

Model

217

Remove/install side Supplemental Restraint System (SRS) pressure sensor

Shown on left front door

1

Electrical connector

B48/7

Left front door pressure sensor

B48/8

Right front door pressure sensor

P91.60-4708-04

Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Topical note

Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

Remove/install

1

Disconnect ground line at the on-board electrical system battery

AR54.10-P-0003LF

2

Remove door lining from left or right front door

AR72.10-P-1000LC

3

Disconnect electrical connector (1)

4

Lift shackle (arrow A) and twist left front door pressure sensor (B48/7) or right front door pressure sensor (B48/8) 900 counterclockwise and remove

5

Install in the reverse order

Powiązane dokumenty