P91.60-2927-09
Shown on model 219.375
1 Left intake pipe
2 Right intake pipe
3 Bolts
B48/1 Driver-side frontal acceleration sensor
B48/2 Passenger-side frontal acceleration sensor
5 Bolts
4 Electrical connector
| Remove/Install | ||
| Notes on avoiding damage to electronic components due to electrostatic discharge | ||
1 | Switch off the ignition and remove the transmitter key from the EIS control unit | In vehicles with Code (889) Keyless Go: Press Keyless Go start/stop button repeatedly until the ignition is switched off. Remove the transmitter key from the vehicle and store at a location that is beyond the transmitter range | |
2 | Open engine hood and move to upright position | ||
3.1 | Removing left intake pipe (1) | When removing driver-side frontal acceleration sensor (B48/1). | |
4.1 | Remove right intake pipe (2) | When removing passenger-side frontal acceleration sensor (B48/2). | |
5.1 | Unscrew bolts (3), disconnect electrical connector (4) and remove driver-side frontal acceleration sensor (B48/1) | When removing driver-side frontal acceleration sensor (B48/1). | |
| |||
6.1 | Unscrew bolts (5), disconnect electrical connector (4) and remove front passenger side frontal acceleration sensor (B48/2) | When removing front passenger side frontal acceleration sensor (B48/2). | |
| |||
7 | Install in the reverse order | ||
8 | Read out fault memory | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system |
Airbag
Number | Designation | Model | ||
BA91.60-P-1007-01J | Bolt, frontal acceleration sensor to front module support | Nm | 7 | |
Commercially available tools
Powiązane dokumenty
- ad0000p200004tx
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar8840p1000tx