Remove/install passenger airbag unit

AR91.60-P-0680FR

Remove/install passenger airbag unit

26.06.2018

Model

257, 290

Shown on model 257

1

Instrument panel

2

Screw

3

Air duct

Shown on model 257 except code 494 (USA version)

4

Screw

5

Mounting clip

6

Nuts

7

Electrical connector

8

Passenger airbag

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Remove display module.

AR54.30-P-6023FR

2

Remove glove compartment.

AR68.10-P-1402FR

3

Remove trim on right and left A-pillar.

AR68.30-P-4050FR

4

Remove TV 3 antenna amplifier under right A-pillar trim.

Model 257, 290
with code 865 (TV tuner)

AR82.62-P-8314FR

5

Unscrew bolts (2).

6

Remove air duct (3).

7

Unclip retaining clip (5) from front passenger airbag holder.

 Dismantling tool

*000589956300

8

Unscrew screw (4).

 Screw/bolt, front passenger airbag unit to crossmember

*BA91.60-P-1002-01O

9

Unscrew nuts (6).

 Nut, front passenger airbag unit to instrument panel

*BA91.60-P-1001-01O

10

Push instrument panel (1) upwards and remove front passenger airbag (8) until the electrical connector (7) is accessible.

 Model 257, 290
with code 460 (Canada version)
Model 257, 290
with code 494 (US version)
There are three electrical connectors (7) on the front passenger airbag.

11

Release and disconnect electrical connector (7) and remove front passenger airbag (8).

 Model 257, 290
with code 460 (Canada version)
Model 257, 290
with code 494 (US version)
There are three electrical connectors (7) on the front passenger airbag.

 Removal lever

*203589043300

12

Install in the reverse order.



Check

13

Check Supplemental Restraint System (SRS) using vehicle diagnosis system.

When replacing the front passenger airbag (8).



AD00.00-P-2000-06FR

 Airbag

Number

Designation

Model 257

Model 290

BA91.60-P-1001-01O

Nut, front passenger airbag unit to instrument panel

Nm

5

5

 Airbag

Number

Designation

Model 257

Model 290

BA91.60-P-1002-01O

Screw/bolt, front passenger airbag unit to crossmember

Nm

4

4