AR91.40-S-1020F | Remove/install seat belt in rear seat | 28.1.09 |
MODEL 638.0## /1## ## as of 238336 as of 3.8.99 with CODE (U63) 3-passenger bench seat, 2nd row
S91.40-4004-06
1 Left bench seat
2 Belt end fitting
3 Screw
4 Covers
5 Seat belt guide
6 Automatic belt retractor
7 Screw
8 Seat belt
| Remove/install | ||
1 | Remove backrest and seat cushion in the center and left from bench seat | ||
2 | Remove covers (4) from center pillar | Do not damage plastic parts | |
3 | Remove rear panel from center pillar | No expansion clips present. | |
4 | Remove expansion clips at front panel of center pillar and detach panel | Do not damage plastic parts | |
5 | Remove expansion clips at lower panel of center pillar and detach panel | Do not damage plastic parts | |
6 | Remove screw/bolt (3) and remove belt end fitting (2) | Installation: Replace bolt (3). | |
| |||
7 | Remove belt guide (5) | Riveted joint must be loosened. | |
Installation: Rivet connection. | |||
Pop rivet gun, model HN 1 | |||
8 | Unscrew bolt (7) | Installation: Install new bolt (7). | |
Let automatic belt retractor (6) hang after releasing. | |||
| |||
9 | Unhook seat belt (8) and remove with automatic belt retractor (6) | ||
10 | Install in the reverse order |
Seat belts/emergency tensioning retractors