AR91.40-S-1020E | Remove/install seat belt in rear seat | 28.1.09 |
MODEL 638.0## /1## ## as of 238336 as of 3.8.99
with CODE (U65) 3-passenger bench seat, 1st row
with CODE (U71) 3-passenger bench seat, 1st row in rear with folding outer seat
S91.40-4001-09
1 Bench seat
2 Belt end fitting
3 Screw
7 Screw
8 Seat belt
4 Covers
5 Seat belt guide
6 Automatic belt retractor
| Remove/install | ||
1 | Remove backrest and seat cushion from bench seat (1) | ||
2.1 | Fold over the outer 3-passenger seat | Only with code U71 (3-passenger bench seat, 1st seat row in rear with folding outer seat). | |
3 | Remove covers (4) from center and right pillar | Do not damage plastic parts | |
4 | Remove rear panel from center pillar | No expansion clips present. | |
5 | Remove expansion clips at rear panel from right pillar and detach panel | Do not damage plastic parts | |
6 | Remove expansion clips at lower panel of center and right pillar and detach panel | Do not damage plastic parts | |
7 | Remove screw/bolt (3) and remove belt end fitting (2) | Installation: Replace bolt (3). | |
| |||
8 | Remove belt guide (5) | Riveted joint must be loosened. | |
Installation: Rivet connection. | |||
Pop rivet gun, model HN 1 | |||
9 | Unscrew bolt (7) | Installation: Install new bolt (7). | |
Let automatic belt retractor (6) hang after releasing. | |||
| |||
10 | Unhook seat belt (8) and remove with automatic belt retractor (6) | ||
11 | Install in the reverse order |
Seat belts/emergency tensioning retractors