AR91.40-S-1020C | Remove/install seat belt in rear seat | 28.1.09 |
MODEL 638.0 /1
with CODE (U60) 2-passenger bench seat, 1st row
with CODE (U63) 3-passenger bench seat, 2nd row
with CODE (U65) 3-passenger bench seat, 1st row
with CODE (U71) 3-passenger bench seat, 1st row in rear with folding outer seat
S91.40-4002-06
1 Bench seat
2 Screw
3 Belt end fitting
4 Covers
5 Seat belt guide
6 Automatic belt retractor
7 Screw
8 Seat belt
| Remove/install | ||
1 | Remove backrest and seat cushion from bench seat (1) | ||
2 | Remove screw/bolt (2) and remove belt end fitting (3) | Installation: Install new bolt (2). | |
| |||
3 | Remove covers (4) | Do not damage plastic parts | |
4 | Remove belt guide (5) | Riveted joint must be loosened. | |
Installation: Rivet connection. | |||
Pop rivet gun, model HN 1 | |||
5 | Remove expansion clips at rear panel from side pillar and detach panel | Do not damage plastic parts | |
6 | Unscrew bolt (7) | Installation: Install new bolt (7). | |
Let automatic belt retractor (6) hang after releasing. | |||
| |||
7 | Unhook seat belt (8) and remove with automatic belt retractor (6) | ||
8 | Install in the reverse order |
Seat belts/emergency tensioning retractors