Remove/install rear seat belts

AR91.40-P-0681TX

Remove/install rear seat belts

13.8.07

5.6.07

"Remove head restraints in rear" added

Step 2

 

Remove/install

 Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

 Danger!

Risk of injury caused by release of spring in the automatic belt retractor is released.

Never disassemble automatic belt retractors.

AS91.00-Z-0002-01A



Notes on performing repair, body work and welding on vehicles with airbags and ETR units

AH91.00-P-0002-01M



Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B



Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

1.1

Switch off ignition and remove transmitter key

On vehicles without code (889) Keyless go.

1.2

Switch off ignition and remove transmitter key for Keyless-Go out of vehicle and keep outside the range of the transmitter

On vehicles with code (889) Keyless Go.

2

Remove rear heat restraints

AR91.16-P-1770TX

3

Remove rear seat backrest

AR91.12-P-1620TX

4

Remove the screw (1) and remove belt end fitting



*BA91.40-P-1007-01M

5.1

Remove left antenna amplifier module

Only when removing left automatic belt retractors with emergency tensioning retractor (6).

AR82.62-P-8300TX

5.2

Remove right antenna amplifier module

Only when removing right automatic belt retractors with emergency tensioning retractor (6) on vehicles with code (529) HIGH Class Japan or with code (860) TV tuner or with code (889) Keyless-Go.

AR82.62-P-8300TY

6

Remove bolts (2)



*BA91.40-P-1005-01M

7

Remove expansion clips (3) from rear shelf (4)

8

Lift rear shelf (4) and remove bolt (5)



*BA91.40-P-1005-01M

9

Disconnect electrical connector at left rear emergency tensioning retractor squib (R12/6) or right rear emergency tensioning retractor squib (R12/7)

10

Remove automatic belt retractor with emergency tensioning retractor (6) and bracket (7)

11

Remove seat belt (9) from belt guide in bracket (7)

 Installation: Fit seat belt (9) without twisting.

12

Remove bolt (8) and remove automatic belt retractors with emergency tensioning retractor (6) from bracket (7)

 If the automatic belt retractor with emergency tensioning retractor (6) is exchanged, the faulty automatic belt retractor with emergency tensioning retractor (6) must be disposed of properly: 



Notes on disposing of airbag and emergency tensioning retractor units

OS91.00-P-0001-01A

 Installation: Note different version (left and right) of automatic belt retractors with emergency tensioning retractor (6).

Insert automatic belt retractors with emergency tensioning retractor (6) together with guide (arrow) into bracket (7) and bolt in place.



*BA91.40-P-1005-01M

13

Install in the reverse order

14

Check supplemental restraint system (SRS) with the aid of STAR DIAGNOSIS



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04TX

Number

Designation

Model
219

BA91.40-P-1005-01M

Bolt to rear inertia reel

Nm

30

BA91.40-P-1007-01M

Bolt, belt end fitting to vehicle floor

Nm

30