Remove/install seat belt with emergency tensioning retractor

AR91.40-P-0630RR

Remove/install seat belt with emergency tensioning retractor

18.03.2019

Model

452.3/4

Shown on model 452.3

1

Automatic belt retractor

5

Cover

9

Bolts

2

Belt guide

6

Seat belt guide bracket

10

B-pillar paneling

3

Mounting screw

7

Mounting screw

11

Mounting screw

4

Belt end fitting

8

Divider

12

Connector

 

Remove/install

 Caution

Risk of injury. Injury may result when the tension in the spring in the automatic belt retractor is released.

Never disassemble automatic belt retractors.

AS91.00-Z-0002-01A

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

1

Unhook seat belt from seat belt guide (2) at seat

2

Remove screw (3) from seat belt end fitting (4)

 Bolt, belt end fitting

*BA91.40-P-1001-01G

3

Remove cover (5) from seat belt guide bracket (6)

4

Remove screw (7) from seat belt guide bracket (6)

 Bolt, upper seat belt guide bracket

*BA91.40-P-1002-01G

5

Remove divider (8)

Model 452.3

 Pay attention to installation position.

 Bolt, divider to body

*BA68.50-P-1001-03D

6

Remove covers and remove screws (9) below

7

Remove B-pillar trim (10)

8

Remove screw (11) from seat belt retractor (1) and remove seat belt retractor (1) upwards

 Installation: Insert seat belt retractor (1) in guide and push downwards.

 Bolt, automatic belt retractor

*BA91.40-P-1004-01G

9

Disconnect connector coupling (12) at seat belt retractor (1)

 Installation: Insert line in bracket.

 If the seat belt retractor is replaced, the defective one must be disposed of properly and in an environmentally-appropriate way.

10

Install in the reverse order

 Cargo retainer, divider

Number

Designation

Model 452.3

BA68.50-P-1001-03D

Bolt, divider to body

Nm

45

 Seat belts/emergency tensioning retractors

Number

Designation

Model 452.3/4

BA91.40-P-1001-01G

Bolt, belt end fitting

Nm

30

 Seat belts/emergency tensioning retractors

Number

Designation

Model 452.3/4

BA91.40-P-1002-01G

Bolt, upper seat belt guide bracket

Nm

30

 Seat belts/emergency tensioning retractors

Number

Designation

Model 452.3/4

BA91.40-P-1004-01G

Bolt, automatic belt retractor

Nm

30