Remove/install seat belt with emergency tensioning retractor

AR91.40-P-0630LC

Remove/install seat belt with emergency tensioning retractor

25.04.2018

Model

217

Shown on left side of vehicle

1

Seat belt retractor

2

Screw

3

Screw

4

Belt guide

5

Screw

6

Screw

7

Electrical connector

8

Electrical connector

9

Electrical connector

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

 Caution

Risk of injury. Injury may result when the tension in the spring in the automatic belt retractor is released.

Never disassemble automatic belt retractors.

AS91.00-Z-0002-01A

Topical note

Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Disconnect battery ground line

AR54.10-P-0003LF

2

Remove rear passenger compartment side trim panel

AR68.30-P-4780LC

3

Remove screw/bolt (6) from belt end fitting

 Bolt, front belt end fitting to longitudinal member

*BA91.40-P-1003-01V

4

Disconnect electrical connector (8) from belt retractor (1)

5

Remove screw/bolt (3) from belt retractor (1)

 Bolt, bracket for front top seat belt retractor to body

*BA91.40-P-1006-01V

6

Remove screw/bolt (2) from belt retractor (1)

 Bolt, front seat belt retractor to bottom of seat belt retractor bracket

*BA91.40-P-1004-01V

7

Disconnect electrical connectors (7, 9) from belt retractor (1)

8

Remove screw/bolt (5) from belt guide (4) and completely remove belt retractor (1) with belt guide (4)

 Bolt, belt guide to mounting bracket

*BA91.40-P-1001-01V

When replacing belt retractor (1)



Dispose of the belt retractor (1) properly

9

Install in the reverse order

 Seat belts

Number

Designation

Model 217

BA91.40-P-1001-01V

Bolt, belt guide to mounting bracket

Nm

35

 Seat belts

Number

Designation

Model 217

BA91.40-P-1003-01V

Bolt, front belt end fitting to longitudinal member

Nm

35

 Seat belts

Number

Designation

Model 217

BA91.40-P-1004-01V

Bolt, front seat belt retractor to bottom of seat belt retractor bracket

Nm

35

 Seat belts

Number

Designation

Model 217

BA91.40-P-1006-01V

Bolt, bracket for front top seat belt retractor to body

Nm

35