ar9130p0036mfa

Remove/install front seat heater/seat ventilation control unit

Typ ar · temat 91.30 · wersja 0104 · 2019-10-10

Dotyczy: Model 118, 177, 247 with code 401 (Climatised front seats) with code 873 (Left and right driver's seat heating)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.30 Ogrzewanie fotela, nawiew fotela — Seria 118 · Seria 177 · Seria 247

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.35 Ogrzewanie fotela/klimatyzacja fotela/ogrzewanie podłokietnika › 39.35.11 Moduł sterujący/ przekaźnik — Seria 118 · Seria 177 · Seria 247

AR91.30-P-0036MFA

Remove/install front seat heater/seat ventilation control unit

10.10.2019

Model

118, 177, 247

with code 401 (Climatised front seats)

with code 873 (Left and right driver's seat heating)

Remove/install front seat heater/seat ventilation control unit

P91.30-2831-08

1

Electrical connectors

N25/17

Front seat heater/seat ventilation control unit

2

Retaining lug

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Carry out commissioning of front seat heating/seat ventilation control unit (N25/17).

If front seat heating/seat ventilation control unit (N25/17) is replaced

AD00.00-P-2000-06MFA

2

Set driver's seat all the way up and toward rear.

3

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

4

Remove bolts from guide rails of driver's seat.

AR91.10-P-1000MFA

5

Tilt driver's seat backwards and release and disconnect electrical connectors (1).

6

Press retaining lugs (2) and take out front seat heating/seat ventilation control unit (N25/17) in direction of travel.

Installation: Ensure that the rear guides retract cleanly and that the retaining lugs (2) audibly engage.

7

Install in the reverse order.

Powiązane dokumenty