ar9130p0031tx

Removing and installing heated seats and seat ventilation control unit

Typ ar · temat 91.30 · wersja 0100 · 2004-11-04

Dotyczy: MODEL 219.3 with CODE (401) Front luxury seat, incl. heated seat and seat ventilation with CODE (872) Electrically heated left and right rear seats with CODE (873) Electrically heated left and right front seats

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.30 Ogrzewanie fotela, nawiew fotela — Seria 219 (modele 3**)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.35 Ogrzewanie fotela/klimatyzacja fotela/ogrzewanie podłokietnika › 39.35.11 Moduł sterujący/ przekaźnik — Seria 219 (modele 3**)

AR91.30-P-0031TX

Removing and installing heated seats and seat ventilation control unit

30.9.04

MODEL 219.3
with CODE (401) Front luxury seat, incl. heated seat and seat ventilation
with CODE (872) Electrically heated left and right rear seats
with CODE (873) Electrically heated left and right front seats

Removing and installing heated seats and seat ventilation control unit

P91.30-2204-06

1 Edge guard

2 Entrance plate

3 Ventilation grille

4 Floor mat

5 B-pillar paneling

6 Electrical connector

N25/7 HS [SIH] and seat ventilation control unit

Remove/Install

Notes on avoiding damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove left front seat

AR91.10-P-1000TX

2

Remove left front door sill molding (2)

AR68.30-P-4100TX

3

Unclip ventilation grille (3) (arrow) and remove

4

Pull floor covering (4) forward under the B-pillar paneling (5) and fold up

5

Unplug electrical connector (6)

6

Using an assembly wedge, unclip HS [SIH] and seat ventilation control unit (N25/7) on one side and remove

Do not contaminate or damage heat conducting foils.

*110589035900

7.1

Remove protective foil above the heat conducting foils on the HS [SIH] and seat ventilation control unit (N25/7)

Only when replacing the HS [SIH] and seat ventilation control unit (N25/7).

8

Install in the reverse order

Removing and installing heated seats and seat ventilation control unit

Mounting wedge

110 589 03 59 00

Powiązane dokumenty