ar9130p0005mcv

Remove/install heated cushion on front seat cushion

Typ ar · temat 91.30 · wersja 0100 · 2007-09-10

Dotyczy: MODEL 451.3 /4 Front passenger seat

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.30 Ogrzewanie fotela, nawiew fotela — Seria 451 (modele 3**, 4**)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.35 Ogrzewanie fotela/klimatyzacja fotela/ogrzewanie podłokietnika › 39.35.30 Poduszka/mata grzewcza — Seria 451 (modele 3**, 4**)

AR91.30-P-0005MCV

Remove/install heated cushion on front seat cushion

21.8.07

MODEL 451.3 /4
Front passenger seat

Remove/install heated cushion on front seat cushion

P91.10-3190-06

Shown on code (S17) Seat heaters (FFO)

1 Sidebag plug

2 Seat heater plug
(with code (S17) Seat heater (FFO))

3 Bracket

4 Seat belt buckle plug

5 Bracket

6 Heated cushion connector
(with code (S17) Seat heater (FFO))

7 Seat console

Remove/install heated cushion on front seat cushion

P91.10-3191-09

7 Seat console

8 Seat backrest

9 Screw

13 Seat belt buckle wiring harness

14 Belt tension sensor retaining plate

15 Belt tension sensor plug

10 Grommet

11 Screw

12 Seat belt buckle

Remove/install

Danger!

Risk of injury caused by backrest suddenly folding forward if release lever is accidentally operated during inspection and repair work

When working on the seat, be careful not to accidentally release the backrest mechanism allowing the seat to fold forward. Keep body parts clear of the backrest travel area.

AS91.00-Z-0005-01V

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

The front passenger seat console (7) must not be dismantled.

1

Remove front passenger seat and carefully place on a suitable surface with backrest (8)

AR91.10-P-1020MCU

2.1

Unclip sidebag plug (1) from seat heater plug (2)

On vehicles with code (S17) Seat heaters (FFO)

2.2

Unclip sidebag plug (1) from bracket at seat console (7)

On vehicles without code (S17) Seat heater (FFO)

3

Expose sidebag wiring harness from brackets (3, 5)

4

Unclip seat belt buckle plug (4) from bracket at seat console (7)

5

Expose seat belt buckle wiring harness (13) from brackets (3)

6

Expose wiring harness for seat heater and disconnect heated cushion connector (6)

On vehicles with code (S17) Seat heaters (FFO)

7

Remove cable tie (arrow)

8

Place front passenger seat on its rails

9

Unclip belt tension sensor plug (15) and put to one side

10

Unclip belt tension sensor retaining plate (14) in rear area and remove

11

Fold backrest (8) forward

12

Remove bolts (9) of backrest (8)

Installation: Position backrest (8) on seat console (7) and screw in bolts (9, 11) up to contact surface. Tighten bolts (11) starting from the front. Move backrest (8) to its rearmost position and lock in place. Tighten bolts (9) starting from the rear. While doing so, press the backrest (8) backwards.

*BA91.10-P-1002-01P

13

Lift backrest (8) in vicinity of seat belt buckle (12) and expose seat belt buckle wiring harness (13) from seat console (7)

Installation: Ensure that grommet (10) is seated correctly.

14

Remove bolts (11) from backrest (8) and remove backrest (8)

The front passenger seat console (7) must not be dismantled any further.

15

Install in the reverse order

Front seats

Number

Designation

Model 451.3/4

BA91.10-P-1002-01P

Bolt of backrest frame to seat frame

Nm

45

Powiązane dokumenty